answersLogoWhite

0

Exactly how much more it weighs will depend on how wet it is.

User Avatar

Wiki User

7y ago

What else can I help you with?

Continue Learning about General Science

How much sand do you need for 135sq meters?

You need 1.35 cubic meters for each centimeter deep.


How much does 1 liter of sand weight?

The density of sand varies depending on what minerals the grains of sand are made of, and wet sand is denser than dry sand. As a rough rule of thumb, a litre of dry sand weighs about 1500 grams.


Why does dry sand weigh more than wet sand?

Anyone who has dug a shovelful of wet sand and a shovelful of dry sand will tell you that the wet sand is quite a bit heavier than the dry sand. Dry sand is composed of individual particles with air in the spaces between grains. When you add water to a bucket of dry sand, the water replaces the air. Although the bucket is already full of sand, you can pour in quite a bit of water, adding that much more weight. If you have a choice of which bucket to carry, pick the bucket of dry sand every time!


How many 50lbs bags 2.5 yards of sand?

49 bags. The density of loose sand is about 90 lbs/cu. ft. There are 27 cu. ft. in a cu. yard. Therefore 27 * 90 equals a total weight of 2,430 lbs. for a cu. yard of sand. Given 50 lbs. per bag of sand, you divide 2430 by 50 and get 48.6 bags of sand. Round up to 49.


Is a litre of sand heavier than a litre of water?

No, a liter of water is heavier than a liter of sand. This is because the density of water is higher than the density of sand. The density of water is approximately 1 gram per cubic centimeter, while the density of sand is typically around 1.6 to 2.65 grams per cubic centimeter. Therefore, a liter of water will weigh more than a liter of sand.

Related Questions

How much does 1220 cubic feet of sand weigh?

10pounds


How much does 3 cubic ft of sand weigh?

that depends on th type of sand


How much does 0.33 cubic yard of sand weigh?

That is approximately 525 Kg depending on dampness of the sand.


How much does a cubic foot of dry garnet sand weigh?

how much space does 25kg of garnet take up


How much does 55 gallons of wet sand weigh?

On average, wet sand can weigh around 120-150 pounds per cubic foot. Given that 1 gallon is approximately 0.1337 cubic feet, 55 gallons of wet sand may weigh between 725-910 pounds.


If 2 cubic feet of sand weigh 90 pounds then how much do 5 cubic feet of sand weigh?

90 over 2 equals X over 5 so multiply 90 times 5 and divide it by 2... Your answer will probably be 225 pounds.


How much does 1 cubic foot of silica sand weigh?

Silica sand weighs approximately 99-125 pounds per cubic foot, depending on various factors such as the particle size and moisture content of the sand.


What is the average weight of one cubic meter of sand?

The weight varies; but if it's dry sand, the cubic meter will weigh around 1500 kilos.


How many cubic meter does 30 20 5 tons of sand weigh?

The weight of sand (or anything else) is not measured in cubic metres!The weight of sand (or anything else) is not measured in cubic metres!The weight of sand (or anything else) is not measured in cubic metres!The weight of sand (or anything else) is not measured in cubic metres!


What is 4 cubic meter's weight?

It would depend on the contents of the cubic meter, 4 cubic meters of air would not have a measureable weight, and 4 cubes of sand/gravel would weigh considerably more.


How much does 1 cubic yard of concrete weigh?

This can vary do to the mixture of sand, stone, cement... but an approximate average would be 3000 lbs


How much does 1 cubic tonne of sand weight?

1 ton, but I don't know whether that's a short ton or a long ton. A cubic ton is a measurement of volume (i.e. how much space it takes up). A cubic ton of sand is how much space a ton of sand takes up. A cubic ton of timber is how much space a ton of timber takes up, and as timber is lighter than sand, a cubic ton of timber is larger than a cubic ton of sand, even though they both weigh the same. As for the volume of a cubic ton of sand, I have no idea. You could get a rough answer this way: "m" divided by "d" where m =one ton in whatever units you are using (e.g. kg) and d = density of sand (in the same units)