When bulbs are connected in series to one another, a failure of one bulb will open the circuit and the remaining bulbs in the line will go out because they have no power. However, bulbs in the line preceding the failed bulb will continue to be lit because their source of power has not been interrupted. When bulbs are connected in parallel, a failure of one bulb will have no effect the remaining bulbs because the power is not routed through any single bulb alone.
Yes, a single gene can affect many traits. this is called plieotropy
The single dot in braille represents 'A'
Normally there is no affect. In a gas, a CHANGE of volume of a single body, will give a change in temperature. If a gas is compressed the temperature will increase. If a gas is allowed to expand, there will be a reduction in temperature. This principle is used in diesel engines, to ignite the fuel by compression and fridges, where an expansion of gas causes cooling.
to isolate and test single variables
what is the different between single and double circulation
If by "its own wire" you mean they are connected in parallel, then one bulb won't affect the others.
If a single light bulb burns out in a string of lights connected in series, all the lights after the burned-out bulb will also turn off because the circuit is broken. However, if the lights are connected in parallel, only the burned-out bulb will be affected, and the rest will continue to work.
Journey released "Lights" as a single in 1978.
Single-family attached houses have a multi-unit design just like that of the apartment within a building. Houses are still built separately but the walls are attached to each other.
{| |- | Depends on what is being attached. If it is a single item, the correct term would be 'Attached is.' If it is multiple items, the correct usage would be 'Attached are.' |}
you do not, they are cornering lights and turn on with the single lights
Lights Out
if you mean "un-attached" as in single the answer is no. he's married to alicial simmons...way.
Yes
yes
a single horsed was attached by two poles. Pairs of horses were attached to a central pole. Four horses were attached in pairs to two poles .
2