You don't. "Foot-pounds" is a unit of energy or torque. "PSI" is a unit of presure.
They're different physical quantities, and they don't convert.
This next comment may be abstruse: If foot-pounds could be converted directly
to PSI, then it would be possible to calibrate your electric meter in Atmospheres
or Pascals, and your barometer could be marked in kilowatt-hours if you wanted that.
Multiply psi x 0.07 to get atmospheres.
The lb (Pound) is a unit of mass (sometimes called weight) and the psi (pounds per square inch) is a unit of pressure. I take it that you need to calculate the pressure of a number of pounds on a certain surface. You may find the suggested web site helpful. You can't convert pounds to pounds per square inch (psi). One is force and one is pressure. If you know the area over which the force is spread, then you can divide the force by the area and get pounds per square inch (psi).
No, It is not possible as they measure different things. Pounds is a measurement of force and psi is a measurement of pressure. This problem is similar to asking if feet can be converted to gallons.
1 ATM = 101325 Pascals 1 Pascal = 1/101325 ATM
1 psi = 6.89476 kPa (rounded) 1 kPa = 0.14504 psi (rounded) 1 mPa = 1,000 kPa
Multiply psi x 0.07 to get atmospheres.
To convert PN25 to PSI, you can use the conversion factor where 1 PN (Pressure Nominal) is equivalent to approximately 145 PSI. Therefore, to convert PN25 to PSI, multiply 25 by 145. This results in approximately 3625 PSI.
1 bar = 14.5 PSI
26 ftlbs then another 79 ftlbs. Loosen all the bolts and then a final 69 ftlbs
To convert 14.73 psi to 15.025 psi, you need to increase the pressure by the difference between the two values. Subtract 14.73 from 15.025, which gives you 0.295 psi. Therefore, you can achieve the conversion by adding 0.295 psi to 14.73 psi, resulting in 15.025 psi.
To convert from torr to psi, divide by 51.715. Therefore, 752 torr is approximately 14.55 psi when rounded to two decimal places.
Multiply psi by 0.006894759086775369 to convert from psi to MPa. ex: 1000 psi = 1000 x 0.006894759086775369 = 6.89 MPa http://www.chapelsteel.com/psi-mpai.html
110 - 130 Scfn is what in psi
Multiply psi by 144 to get psf.
To convert 0.50 MPa to psi, you can use the conversion factor: 1 MPa is approximately equal to 145.038 psi. Therefore, 0.50 MPa is approximately equal to 72.519 psi.
Inches of mercury x 0.4912 = psi
To convert bar to psi (pounds per square inch), you can use the conversion factor that 1 bar is approximately equal to 14.5038 psi. Therefore, to convert 2.4 bar to psi: 2.4 bar × 14.5038 psi/bar ≈ 34.8 psi. So, 2.4 bar is approximately 34.8 psi.