0
If an air bubble was trapped in a metal rod would it affect the rod's density?
Wiki User
∙ 7y ago
Yes, the overall density would be less than if the rod were pure metal.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
How would the density of a metal be affected if it were wet?
how would density of a metal be affected if it were wet
If gold in the crown was mixed with a less-valuable metal like bronze or copper how would that affect its density?
It would lower it.
What is the density of the element Mercury?
The density of the metal mercury (liquid) is 13,534 kg/m3 or 13.534 g/cm3. The correct SI measure of the density is kg/m3.
What is the Density of a square metal block that is 4 cm on a side and has a mass of 320g is?
5g/cm3
If something is compact what is its density?
Copper has a density of rho = 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of rho = 1000 kg/m3 = 1000 g/L = 1.000 kg/dm3 = 1.000 kg/L = 1.000 g/cm3 = 1.000 g/mL Helium has a density of rho = 0.1785 kg/m3 = 0.1785 g/L = 0.0001785 kg/dm3 = 0.0001785 kg/L = 0.0001785 g/cm3 = 0.0001785 g/mL. In this example: Metal has a density of 8950 kg/m3. Liquid has a density of 1000 kg/m3. Gas has a density of 0.1785 kg/m3. The metal copper is compact.
How does an air bubble inside a metal ball affect density?
It will increase the total volume, but it will hardly affect total mass. Remember the definition of density as mass / volume.
Will air bubbles affect the volume when measuring the volume of a metal.?
Air bubbles would make the volume you read in the measuring cylinder increase from the actual volume of theliquid. so when you add in the metal, there would be an increase in the volume of the metal than it really is. the mass of the metal cannot be affected by air bubble because this is the amount of matter in the metal. This increase in volume causes the density of the metal to reduce from its original value. since mass is constant, density is inversely proportional to volume. As volume increases, density decreases.hope that was helpful.
How does the density of the metal in the crushed can compare with the metal's density before the can was crushed?
It depends on what you're measuring: the density of the aluminum or the aluminum and the space inside the can. If it's the density of the aluminum only, it doesn't change much. If it's the density of the aluminum and the space inside the can, the density greatly decreases as you are getting rid of the air, and therefore the volume, inside. This also depends on if you are using your foot or a garbage compacter.
What metal has a density?
Every metal has a density.
Is density a metal?
Low Density a Metal?NO!!!!
Is low density a metal?
Low Density a Metal?NO!!!!
How does the density of the metal in the crushed can compare with the density of the metal before the can was crushed?
The density of the metal doesn't change when you crush a can.
Why does a ship built from heavy metal float on water while metal actually sink in water?
An object will sink in water if it has a greater density than the water. This refers to the object's TOTAL or AVERAGE density, not necessarily the density of individual parts. Specifically, in the case of a ship, it includes the air that is trapped inside.
What metal has the density of 5 gmL?
what metal has a density of 5 g/mL
How does the density of a metal in the crushed can compare with density of the metal before the can was crushed?
The density of the metal will remain the same. However because the volume of the object has been reduced the overall density will increase
What is the density of a metal if you cut it in half and the original density was 8.4?
The density is the ratio of mass to volume. It doesn't matter what size the piece of metal, if it is the same metal it has the same density, 8.4.
How does changing the shape of the metal affect the density of the boat?
Indeed yes. Density is defined as mass per unit volume. If all the mass were concentrated in one lump, your boat would no longer float. If the metal walls of the boat were a little thinner, you'd have more boat volume, and lower density.
