we can use both timers ...
Obelisk, Sundial, Merkhet, water clock, escapement, quartz clocks, atomic clocks, wrist watch, the sun, and a microwave are just a few.
As many as you have, if you give him enough time.
At any given time, a human hand may contain as many as 5,000 germs.
8
There are approximately 5,000 germs on your hand at any given time
for accurate time rc oscillator is common in non time critical stuff
OTP 8051 refers to a specific type of microcontroller based on the 8051 architecture, which is programmed using One-Time Programmable (OTP) memory. This means that once the program is written to the chip, it cannot be modified or erased, making it ideal for applications where the code is finalized and will not need updates. OTP 8051 microcontrollers are commonly used in embedded systems for tasks like control, automation, and data processing. Their limited reusability is compensated by their reliability and simplicity in design.
There are many different types of electronic timers which includes time indicators (for specific times), reset timers, repeat cycle timers (for repition of same cycle) and Multi-function timers.
hi all. as my knowledge some times while writing a code or executing a code suddenly it will struck....so that time we can't do anything....so we want to go initial stage,that time we are using this reset .after resetting microcontroller stop temporarily its operation.then it will come initial stage...
Embedded systems commonly use several types of timers, including hardware timers, software timers, and real-time clocks (RTCs). Hardware timers are integrated into microcontrollers and provide precise timing for events and interrupts. Software timers, implemented in the system's firmware, help manage time-based operations without dedicated hardware. Real-time clocks maintain time and date information even when the system is powered off, ensuring accurate timekeeping in applications like scheduling and logging.
The recording timer is used to measure time. Races for example will use a recording timer to track certain records.
you dont need round the clock attendants or valets you tend to need more expensive labor to fix the machines tho these can be part timers since we have cell phones now possibly cheaper than live parking attendants but response time is a LOT slower
Stupid question the diffrance is that a timer is small a counter is big timers are used for time counters are used like desk did is answer it
I had an external time delay device for my camera in the 1960s.
The advantages of the micro processor is that it small cheap to produce and is able to take over a lot of tasks that were time consuming to people. advantages of micro processor is that these are general devices which can be programmes to execute a number of tasks. The disadvantages are that this tends to make some. the disadvantages are that the can crash and you can lose all your work. by deva
Hey hi ! R u specifically asking about the components ??. . But It is more known of being interfaced with other components. IMicrocontroller is known as "SYSTEM ON CHIP." Well, in total, microcontroller is composed of 1. ALO(arithmetical and logical operations), 2. I/O PORTS(Serial specifically), 3. Internal Memory(RAM/ROM), 4. one has the freedom to choose the priority of operations and 5. last but not the least TIME DELAY is provided.
I would argue that digital timers are better because dials are often difficult to set for exact time amounts. Also the digital timers allow the consumer the ability to perform other operations that a dial is not able to provide.