low pressure on a weather map
l.57
In order to measure area of an object in math you will have the multiply the objects witdth X (times) length then you will have your area or the inside of the object. Depends on the shape! For a rectangle or square it is A=L*B Depends on the shape! For a rectangle or square it is A=L*B Depends on the shape! For a rectangle or square it is A=L*B
First of all to correct . The area is NOT 14 feet , that is a liner measurement, but 14 sq.ft. (square feet) #Hence A = lb = 14 sq.fr. P = 2( l + b) = 18ft. b = 14/l & l + b = 9 Substitute (14/l) + l = 9 Multiply though by 'l' 14 + l^2 = 9l l^2 - 9l + 14 = 0 Factor ( l - 7)(l - 2) = 0 Hence l = 7 ft. and l = 2ft Common sense dictates that the length is 7 ft.
area of object = l* b = 9 X 34 =306 inch ^2
38 inches = perimeter 2*(w+l); 88 sq inches = Area (w*l)
The "L" on a weather map indicates a low-pressure system. Low-pressure systems typically bring cloudy and rainy weather as they are associated with rising air and atmospheric instability.
An area of low pressure on a weather map is typically indicated by an "L" symbol. This symbol is used to show where the center of the low-pressure system is located.
The "L" on a weather map stands for low pressure.
A L is used to indicate a low pressure system
A red "L" on a weather map typically denotes a low-pressure system. This indicates an area where air is rising, leading to the possibility of cloudy skies, precipitation, and potentially stormy weather conditions.
l
The letter H on a weather map indicates high pressure, while the letter L indicates low pressure. High pressure generally brings fair weather, while low pressure often brings unsettled conditions with clouds and precipitation.
In a fuse labeled T2AL 250V, the "L" stands for "Low breaking capacity." This indicates that the fuse is designed to break the circuit under low fault current conditions. The "T" signifies that it is a time-delay fuse, while "2A" indicates the current rating of the fuse, which is 2 amperes. The "250V" specifies the voltage rating of the fuse.
When a thermometer displays "L", it typically indicates that the temperature reading is below the thermometer's lower limit or range of measurement. This could be due to the temperature being too low for the thermometer to accurately detect.
H stands for high such as heat and that is the definition edit by 2797jake: I believe it means a high pressure area and L for a low pressure area. On weather maps the H stands for high-pressure and the L stands for low-pressure.
84cm² area= l x w = 12 x 7 = 84cm²
The symbol "L" on a weather map indicates a low-pressure system, which is typically associated with unsettled weather conditions such as clouds, precipitation, and sometimes storms. Low-pressure systems are areas where air is rising, leading to potentially inclement weather.