0
What else can I help you with?
Refers to the amount of a specimen you are able to see?
Field of view ^-^ Field of view >.< xD
How should a student adjust the microscope in order to view a greater portion?
To view a greater portion of a specimen under a microscope, a student should switch to a lower magnification objective lens, such as a 4x or 10x lens. This allows for a wider field of view, making it easier to observe larger areas of the sample. Additionally, the student should ensure the stage is properly positioned and the specimen is centered before adjusting the focus. Always refocus gently to avoid losing sight of the specimen.
When looking at a specimen for the fir ts time under a microscope do you view with high power objective or lowest objective fir ts?
first view with low power then gradually increase the power. hope it helped you!
When do you use the course adjustment knob on the compound light microscope?
The course adjustment knob on a compound light microscope is used for making large changes in focus when initially locating a specimen. It is typically used with low-power objectives to quickly bring the specimen into view. Once the specimen is roughly focused, the fine adjustment knob should be used for precise focusing. Using the course knob with high-power objectives can risk damaging the slide or the lens.
How should you first focus on a specimen when using the microscope?
start by focusing with the lowest lens to make sure the slide is right and you can see the specimen them proceed to the next lens power and focus again just to make the view clear then proceed to the highest and focus one more time
Which kind of microscope magnifies specimen to produce the virtual image of the specimen?
A virtual image of a specimen is produced by an optical microscope, which magnifies the specimen using lenses to create an enlarged view that is visible to the human eye. This type of microscope does not require direct contact between the specimen and the lens, hence producing a virtual image.
What is the amount of specimen you are able to see on a microscope called?
The amount of specimen visible on a microscope is referred to as the field of view. This refers to the diameter of the circular area that is visible when looking through the microscope. The field of view may vary depending on the magnification level of the microscope lens.
What form is a specimen in when you see clearly down a microscope?
A specimen is in focus when you can clearly see and distinguish its details when looking through a microscope. Adjusting the focus of the microscope allows you to bring the specimen into clearer view.
Which type of microscope gives a three-dimensional view of the specimen?
A scanning electron microscope (SEM) is a type of microscope that gives a three-dimensional view of the specimen by scanning the surface with a focused beam of electrons. The image produced by an SEM provides detailed topographical information of the specimen's surface.
How is it called when you see a specimen clearly down a microscope?
When you see a specimen clearly down a microscope, it is referred to as having a "clear or sharp focus" where the details of the specimen are in clear view. This indicates that the specimen is properly in focus under the microscope, allowing for accurate examination and observation.
What part of the microscope you look into?
The part of the microscope that you look into is called the eyepiece.
What will happen to the specimen under the microscope if you move the specimen toward you?
If you move the specimen toward you while looking under the microscope, it will appear to move in the opposite direction, away from you, within the field of view. This is because the image seen through a microscope is inverted.
What type of microscope gives a three-dimensional view of the specimen?
A binocular microscope, which is commonly called a dissecting scope.
What is stage on a microscope used for?
The stage on a microscope is used to hold and support the specimen being observed. It allows for precise positioning and movement of the specimen in order to view different areas under the microscope lens.
What you want to look at under a microscope is put one of these?
A slide.
What refers to the amount of a specimen you are able to see in a microscope?
The field of view refers to the amount of a specimen visible through the microscope. It is typically measured in millimeters or micrometers for a given magnification level. The field of view may vary depending on the type of microscope and objective lens being used.
What type of microscope can only be used to view nonliving specimen?
A scanning electron microscope (SEM) can be used to view nonliving specimens such as metals, ceramics, or other inorganic materials. It is not suitable for viewing living specimens due to the vacuum conditions and electron beam used in the imaging process.
