a ton is 2000 pounds so divide 45000/2000 so 22.5 tons
Yes It is. The wheel is where you hold and the axle is the part where it is conected to the object.
because the wheel turns through a much greater distance than the axle.but the smaller turn of the axle is more powerful.witten by-brenda v.=========================Answer #2:-- The fact that the wheel turns through a greater distance that the axle doesis a result, not a cause, of the wheel being bigger than the axle.-- The axle is not more powerful than the wheel. Ignoring losses, they must bothhave the same power. The axle's force is greater than the wheel's force, but to payfor it, the axle must turn through greater distance. Same as all the lever stuff.-- The diameter of the wheel needs to be greater than the diameter of the axleonly if you'd prefer not to have the axle scrape on the ground.
the mechanical advantage is noting
Wheel and axle could be the type of simple machines because it has a wheel for it could advance to the front and to the back, and what the axle do is that is making the wheel move and its at the bottom of the toy car or any car
driveshaft
Either change the tire rating or change the axle to a 10,000# rating
The weight a 16 ft tandem axle trailer can carry typically ranges from 3,500 to 7,000 pounds, depending on the trailer's design, construction, and axle rating. Most common tandem axle trailers are rated for around 5,000 to 6,000 pounds. Always check the manufacturer's specifications and the trailer’s Gross Vehicle Weight Rating (GVWR) for precise limits. Additionally, load distribution and the type of cargo can also affect the trailer's capacity.
The weight a single axle trailer can carry typically ranges from 1,500 to 7,000 pounds, depending on the trailer's design, materials, and axle rating. Most commonly, single axle trailers are rated for around 3,500 to 5,000 pounds. It's essential to check the manufacturer's specifications for the exact weight capacity and ensure that the load does not exceed this limit for safe towing. Additionally, consider the weight of the trailer itself when calculating total load capacity.
The weight limit of a single axle trailer depends on several factors. The frame, axle type, tire rating, and the springs all have to be factored in.Smaller trailers could be rated at only a few hundred pounds, while heavier built units can haul full sized cars.
The hauling capacity of a two-axle gooseneck trailer typically ranges from 10,000 to 20,000 pounds, depending on the specific trailer's design, materials, and manufacturer. It's essential to check the trailer's Gross Vehicle Weight Rating (GVWR) and the towing vehicle's capacity to ensure safe operation. Additionally, payload capacity may vary based on the trailer's configuration and additional features. Always refer to the manufacturer's specifications for accurate information.
Of course it does. If you think it is close, go to a truck stop with a scale A: weigh your whole rig (all 3 axles on the scale), B: just the rear axle of the vehicle and the trailer C: just the trailer axle. D: Remove the trailer and weigh your towing vehicle. Calculate: E: The loaded trailer ( A minus D) should not exceed the towing capacity rating for the vehicle or the weight rating for the trailer. The load on your rear axle with the trailer (B minus E) should not exceed the weight rating for that axle THIS IS VERY IMPORTANT: have you ever seen trailers swaying on the highway? this is very dangerous. Your trailer tung weight - the weight on the hitch (E minus C) , should be about 15% of the weight of the trailer. That bumber cannot exceed the weight rating of the hitch, but if it is too small the trailer can be very difficult to control.
A single axle with dual wheels that has a rating of 5 tons can carry 10,000 pounds. The bed of the truck has to be the same rating as the truck, though.
All trailers have a weight limit that is stamped on the trailer somewhere. Normally it is stamped on the trailer tongue or on a data plate attached to the tongue or trailer frame. You can also determine the weight the trailer can handle by the diameter of the axle. Find your measurement in the following table of typical axle diameters: 1.5-inch diameter, 1,000 pounds 1.75-inch diameter, 2,000 pounds 2.375-inch diameter, 3,500 pounds 3-inch diameter, 6,000 pounds 3.5-inch diameter, 8,000 pounds 4-inch diameter, 9,000 pounds 5-inch diameter, 10,000 pounds Multiply the axle capacity by the number of axles to get the maximum load capacity for your utility trailer. Remember that no matter the capacity of the trailer you must have the correct trailer hitch in order to safely pull the trailer.
The axle weight limit for a 53-foot dry van trailer typically adheres to federal regulations in the United States, which allow a maximum of 34,000 pounds on the tandem axles (the two axles at the rear of the trailer). The Gross Vehicle Weight Rating (GVWR) for the entire combination, including truck and trailer, cannot exceed 80,000 pounds on interstate highways. However, it's essential to check local regulations, as they may vary by state. Always ensure proper distribution of cargo to meet these limits.
You can tow with a 1995 Ford Explorer but care must be taken to stay within its rating. It is capable of towing a trailer a weighing up to 3,500 pounds. ================================================================================ It really depends on how the 1995 Ford Explorer is equipped : With the 4.0L V6 , automatic , 4 door , it depends on what the axle ratio is and if it is a 4X4 or rear wheel drive model ( it could be as low as 1496 pounds , I believe 3500 pounds is the maximum using a BUMPER trailer hitch ) * my 1995 Ford Explorer XLT , 4.0L , has the trailer towing package that includes the 3.73 Traction Lok axle ( D4 is the axle code ) and with a frame mounted hitch the maximum is 5,000 pounds
The maximum load capacity of a 53-foot tri-axle semi-trailer typically ranges from 40,000 to 50,000 pounds, depending on the trailer's design and construction. It's important to consider the trailer's Gross Vehicle Weight Rating (GVWR) and the weight limits set by federal and state regulations. Always check specific manufacturer specifications and local regulations to determine the exact capacity for a particular trailer.
12000 pounds