On a ruler, 2.95 inches would be located between the 2-inch mark and the 3-inch mark. This measurement is typically represented by smaller incremental markings between the whole numbers on the ruler. Each inch on a standard ruler is divided into 16 equal parts, so 2.95 inches would fall 15 parts past the 2-inch mark.
It is 2/10 past the one inch mark on a ruler.
need to know 3mm into inches
Just a "smidge" under 3 11/16 inches. That's as close as you're going to get it on a ruler based on 1/16th inch increments. (From a graphic artist who has struggled with this one forever.)
You will not find 4.78 inches on a ruler. The graduations for inches are numbered and these are usually subdivided into 10. So 4.78 inches will be a tine fraction short of the eighth division after the 4 inch mark.
A metric ruler is 30 cm in length. This type of ruler is commonly called a metric foot ruler because it is similar in length to a one foot ruler.
There are 12 inches in one foot. Therefore, 295 inches is equal to 295/12 = 24.583 recurring (that is, 24.583333..) feet or 24 feet 7 inches.
295 centimeters = 9 feet 8.1 inches
1 inch = 25.4 mm so 240 mm = 240mm/25.4mm/in = ~9.449 inches so 295 x 240 mm = ~ 295 x 9.449 inches = ~2787.40 inches
Where is 0.71 inches on the ruler
3.166667 inches is 3.166667 inches, whether on a ruler or anywhere else.
Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
On the Imperial Scale Rule ; it is divided into 12 inches, which is 1 foot.
It is 2/10 past the one inch mark on a ruler.
12 inches
show 1.38" on a ruler
It depends on the ruler. Common units are inches or centimetres.
12 inches, which is 1 foot which is the size of a ruler.