Just a "smidge" under 3 11/16 inches. That's as close as you're going to get it on a ruler based on 1/16th inch increments. (From a graphic artist who has struggled with this one forever.)
If 1 inch is 2.54cm then 2.54 x 11 = 27.94cm's Nearly a ruler
It is 2/10 past the one inch mark on a ruler.
On a ruler, 2.95 inches would be located between the 2-inch mark and the 3-inch mark. This measurement is typically represented by smaller incremental markings between the whole numbers on the ruler. Each inch on a standard ruler is divided into 16 equal parts, so 2.95 inches would fall 15 parts past the 2-inch mark.
The metric side of the ruler is usually marked in centimetres (cm), with ten sub-divisions between each cm mark. 11 millimetres w= 1.1 cm so it is at the first tick after the 1 cm mark.
need to know 3mm into inches
3 and 2/3 in.
3 inches if on the inches side, 3 centimeters if on the centimeters side.
Where is 0.71 inches on the ruler
It is 3/10 of an inch before 2 inches on the ruler
If 1 inch is 2.54cm then 2.54 x 11 = 27.94cm's Nearly a ruler
3.166667 inches is 3.166667 inches, whether on a ruler or anywhere else.
On an inch ruler, 1.666 inches would fall between the 1 5/8 inch mark (1.625 inches) and the 1 11/16 inch mark (1.6875 inches). To locate 1.666 inches precisely, you would need to estimate the position between these two marks based on the incremental markings on the ruler.
Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
one and onethird ounces.
0.66 on a ruler represents 0.66 inches or 66 hundredths of an inch. It would fall between the 5/8 inch mark and the 11/16 inch mark on a standard ruler.
On the Imperial Scale Rule ; it is divided into 12 inches, which is 1 foot.
It is 2/10 past the one inch mark on a ruler.