if u connecting the synchronus generator to the grid at low voltage then it will act as a motor, reverse power will enter after some time winding is burn out if tripping is not occur at reverse power.
Boom!!!!!!!!!!!!!! The electromagnetic force created in the Generator is instantaneously converted into mechanical work. This means the Stator (Stationary portion) will MOVE while disapating this energy. The Generator could shear it's coupling bolts to the rest of the machine or even its fondation bolts. I've seen a 10 ton generator completely shear its foundation bolts and flip onto it's side (very scary)
current flows in both directions, depending on the AC voltage, i.e when ac is higher, current flows to the dc side, and vice versa
Observation is different from imagination. This is because observation is something that happens in real life while imagination is in your mind.
Different vibration frequencies of the vocal cords result in different sounds. This is essential for singers of all kinds. The vocal cords allow for musical sounds of the voice to be expressed.
They will need to keep redoing it until everyone has the same answer
the light is reflected back at different angles because the mirror is curved
ASYNCHRONOUS is a mode whereby events happens irregardless of control. SYNCHRONOUS are this same events but controlled by a timing and/or control
If load on a generator is greater than the generator can provide, the generator will begin to slow down. If it slows down too much, it will lose synchronism.
If the commutator is removed from your generator, you (if you connect slip rings) get AC supply instead of DC supply. the function of the commutator is to convert AC to DC supply and vice versa.Additional AnswerRemoving the commutator will also prevent you from connecting the output of the generator to its load. Remember, the generator's armature is spinning!
Are you working on a hydrogen generator?
anything will happens by using same speed with same time its called syncronization..
By reducing the output fusing of a generator, the total output of the generator will also be reduced. The capacity of the generator will remain the same but the fault trip point will be lowered.
A synchronous motor is not self starting.However when it is provided with some prime mover ,which rotates it up to 80% of sync. speed,then it continues to rotate at sync.speed even after prime mover is removed.It happens so because rotor poles are locked with rotating magnetic field and hence the speed is always synchronous.
The rated voltage of a generator decreases due to many causes such as armature reaction, overloading of the generator and AVR failure/ weak excitation voltage.
A coil of wire spins in a magnetic field
The unused power goes to "waste"
You are able to chat, draw and communicate with them using your DS. Depending on the System you own, it may possibly be different.
If the load is too heavy the voltage droops because of the drop across the generator's internal impedance.