0
If 200V AC generator connected to 200V DC generator then what happens?
Wiki User
∙ 11y ago
current flows in both directions, depending on the AC voltage, i.e when ac is higher, current flows to the dc side, and vice versa
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is needed to generate AC electricity?
An AC generator (Alternator). A rotor is turned into a magnet by what is known as 'excitation' current. The rotor then induces AC current in the stator windings as it is rotated within it. This is AC, due to the fact that the rotor has a north and south pole, which alternately induces current in the stator windings. The exitation current is provided to the rotor via slip rings. Controlling this excitation current will also control the output power by suitable control circuitry. This is the same principle, whether it is a small domestic generator, a power station, a wind turbine, or a car alternator.
How does a solar powered generator work?
A solar powered generator involves a photovoltaic module, a deep cycle rechargeable battery and a power inverter. The photovoltaic module takes in sunlight and converts it to a DC or direct current and this is stored in the battery. The battery can then be used to power household appliances by taking the power from it and converting it to alternating current or AC with the inverter. The plug in the generator puts out AC for an appliance to use.
What condition will sinusoidal voltage be generated in a coil of wire that rotates in a magnetic field?
a generator or alternator,if the magnetic is permanent the current produced from the coil will be alternating current ac.
What produces electricity by spinning a magnet in a coil of wire?
A generator or alternator. If the magnetic field is permanent, the current produced from the coil will be alternating current. AC. Alternators usually work the other way round. The magnet is spun inside a coil of wire. The power is taken off from the stator. The rotor is an electromagnet, fed via slip rings on the shaft. The strength of the magnet can be varied and controlled externally, to control the output voltage.
Who invented the AC electric generator?
The nineteenth century British physicist, Michael Faraday invented the first electrical generator known as the dynamo.The first electric motor capable to move machinery was constructed by William Sturgeon in 1832 but in 1888 Nikola Tesla invented the first practicable AC motor and with it the polyphase power transmission system.
How can an ac generator be converted to DC generator?
It may not be possible to physically convert AC generator to DC generator. What can be done is that 'Rectifier' of suitable capacity can be connected to the out put of AC generator to get DC supply.
How is a Load applied to a ac generator?
The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
Ac generator construction?
what is the construction of ac generator
Which is usually produced by a generator ac or DC?
An ac generator produces ac, a dc generator produces dc, it all depends on the generator.
What happens if a DC motor is connected to an AC supply?
Through loda
Does an alternator work similar to an ac generator?
Alternator and ac generator is equal
Does a generator produce ac or DC voltage?
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.
What happens if an ac supply is given to dc generator?
AC supplies are not given to DC gennies. A DC gen requires a mechanical prime mover.
Is dynamo an AC generator?
DC generator
How do you step down frequency and voltage from an AC generator?
You step down voltage from an AC generator with a transformer.You step down frequency from an AC generator with a motor/generator set, or with an inverter. This is not a common thing to do.
What happens if commutator of DC generator is removed?
If the commutator is removed from your generator, you (if you connect slip rings) get AC supply instead of DC supply. the function of the commutator is to convert AC to DC supply and vice versa.Additional AnswerRemoving the commutator will also prevent you from connecting the output of the generator to its load. Remember, the generator's armature is spinning!
What is another name for an ac generator?
an induction generator
