it evaporates which means it turns into water vapour
Turn off the hot water to your tank and do not use any water -- and leave it off for about 30 min. -- then turn your valve back on and if you hear water going back into tank you have a leak somewhere
what happens to things that sit in water for a long time?
chilling or refrigeration =========================
Water can become stale if you leave it out too long. This is because carbon dioxide gets into the water and lowers the pH.
The refrigerant used in a lithium bromide refrigeration system is water. This system utilizes the absorption refrigeration cycle, where water is the refrigerant and lithium bromide serves as the absorbent to remove heat from the desired space.
Sludge in a refrigeration system can lead to reduced system efficiency, decreased cooling capacity, and potential damage to components such as the compressor. It can also cause blockages in the system, leading to uneven cooling or system breakdown. Regular maintenance and proper filtration can help prevent the formation of sludge in a refrigeration system.
When fast water passes it leave
it expands
what happens if you leave a hsssssssssssssssssssssssssssssssssssss
no... water in the refrigeration system is a very bad thing. The air conditioning system will remove moisture (humidity) from the air and require a drain to channel that water away from the coil.
In a refrigeration system, 1 ton of cooling capacity is equal to 3-4 gallons per minute (GPM) of water flow rate for the evaporator coil. This value may vary depending on the specific system design and operating conditions.
The lima beans will bounce in the water
Water-cooled chillers work by circulating water through a refrigeration system to absorb heat from a building or process. The warm water is then cooled down in the chiller and recirculated back into the system. This process helps to regulate the temperature and maintain a comfortable environment.
A chiller system uses heat to create chilled water by transferring heat from the water to a refrigerant, which then circulates to reject the heat to the outside environment. The chilled water is then used for air conditioning or refrigeration purposes.
The efficiencies of the system or systems will be greatly reduced. Because cooler air holds less moisture than warm air, the refrigeration system not only has to cool the air, but it has to dehumidify it at the same time. And since water vapor is condensed into water gives off a large amount of heat, there are times in humid areas where 70% or more of the systems capacity goes to removing moisture. That doesn't leave a lot for the actual cooling of the air.
The answer is, 1 Drop. p.629 Refrigeration & Air Conditioning Technology 5th Edition