A Radiator.
When a clutch gets hot the surfaces become more slippery and can cause them to warpand get heat spots which will make it jump and slip prematurely
For what?It requires a heat gain for the water,but a heat loss for whatever the water is in contact with.
Salt influences heating/cooling of water.When we want to heat a seawater from 20 to 50 degrees in an electrical kettle, we'll spend more time and electricity for doing it, than for usual water.ProofTo determine the value of heat, that has been added/removed to/from water the following law is used:dQ=m*C*dTwheredQ - amount of added/removed energy (heat), kJm - mass, kgC - specific heat capacity, kJ/kg-K (depends on a type of material)dT - change of temperature, C (or K)Changing specific heat capacity, one changes ability of a material (in the case - water) to absorb/dissipate heat, in a same range of a temperature change.Example. There is 1 kg of usual water, its' temperature is changed on 10 deg K.C of water is 4.18 kJ/kg-k. Amount of heat Q, that water excepts is:Q=1*4.18*10=41.8, kJC of salted water is 4.8 (depends on salinity), so amount of heat, that salted water absorbs is 48 kJ.That means, that to change temperature of salted and usual water on a same amount of degrees, we need to put more heat in a salted water.
Someone Else:No because water has a higher specific heat than soil No because water has a higher specific heat than soil Also because water as a higher heat capacity than land. Duhh... It is not because of whatever that other person wrote. I'm just improving their answer! Yay Me!!! No.land will absorbs heat faster than water Beause the soil locks heat in
Water absorbs and radiates heat better than soil does.
dissipate heat
memory
To calculate the mass of water that would need to evaporate to dissipate 2000 kJ of heat, we need to use the heat of vaporization of water, which is 2260 J/g. By converting the energy to joules and dividing by the heat of vaporization, we find that approximately 884 grams (0.88 kg) of water would need to evaporate from the athlete's skin.
to dissipate heat.
Evaporation
When heat is applied to a balloon filled with water, the water absorbs some of the heat energy, preventing the balloon from reaching a temperature high enough to burst. The water inside the balloon also helps dissipate the heat more evenly, reducing the likelihood of a rapid increase in pressure that could cause the balloon to pop.
because liquid, especially water can dissipate heat. Water's actually the best at dissipating heat but since water boils/freezes(we don't want that especially in the winter, it'll just crack your rad due to expansion) they add antifreeze.
It's called a Heat Sink.
They dissipate heat built-up inside the computer.
The only way to remove heat from an orbiting spacecraft is through radiative heat transfer to space. This is typically achieved using thermal radiators that dissipate heat into space, as there is no medium (like air or water) present in space to conduct heat away.
Unlike small air-cooled engines in motorcycles and lawn mowers, car engines generate significant heat that must be transferred from the engine and oil systems. A water pump is required to constantly carry away and dissipate this waste heat.
Yes, the potency of caffeine can dissipate over time due to factors such as exposure to air, light, and heat, which can degrade its effectiveness.