answersLogoWhite

0

a test to be conduct for find the phase...

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you test polarity on a boiler?

To test polarity on a boiler set the meter to loop, touch the two leads together, and it will buzz or read as "000". This will show you the polarity as well as test for continuity.


Is polarity important when testing when testing continuity?

testing polarity of CT by Flick test . A centre zero voltmeter is connected across CT secondary .A 1.5V battery is touched to primary of CT .the deflecting of pointer should be similar in case of each CT to be connected in same protection .


What test would identify a short circuit in a lighting circuit?

earth continuity insulation resistance polarity


What is the equipment required to do a CT polarity test?

You shouldn't need to perform a polarity test on a CT, as its terminals are normally identified with polarity markings.


What is a continuity test?

a continuity test is the checking of an electric circuit to see if current flows. That it is in fact a complete circuit.


What test don't you have to do on a lighting circuit?

A continuity test, just turn the lights on and if there is continuity the fixtures will let you know.


What is continuity test?

a continuity test is the checking of an electric circuit to see if current flows. That it is in fact a complete circuit.


How do you test continuity?

A continuity test is performed using aids. The aids are placed across a chosen path and the flow of the current is checked.


What is the difference between an Insulation Resistance Test and a Continuity Test for Electric Cables?

A continuity test checks to ensure that there is no break in the conductors. An insulation test checks to ensure that the insulation is sound.


How to test with a multimeter to check for continuity in an electrical circuit?

To test for continuity in an electrical circuit using a multimeter, set the multimeter to the continuity or resistance setting. Then, touch the probes to the two points in the circuit you want to test. If there is continuity, the multimeter will beep or show a low resistance reading. If there is no continuity, the multimeter will not beep or show a high resistance reading.


What is the aim of doing polarity test on the transformer?

Knowing the polarity of transformers is important if they are to be connected in parallel.


How do you test reverse power trip?

There is a test swich which will change the polarity of the sensors........