0
What else can I help you with?
A shiny surface reflects less light than a matte surface?
A shiny surface reflects 'more' light than a matt surface.
The type of surface that warms up the slowest is the?
The type of surface that warms up the slowest is the "ocean" surface.
When was Arising from the Surface created?
Arising from the Surface was created in 1980.
The pull on the surface of the liquids that allow liquids to form drops when they fall?
It is surface tension.
What can change the surface area to volume ratio?
Yes. There are ways to do that, but it depends on what you wish to change the surface area of. Changing the surface area of something like, say, a shotput is difficult, but changing the surface area of a balloon can be accomplished by merely blowing it up (more) or deflating it.
How do you measure and mention defects on plate?
You can measure defects on a plate with a 3-D surface map. To mention defects on a plate in a report you would want to include the shape, surface roughness, and surface finish of the plate.
What type of surface defects on the casting?
your a Dylan
What is an example of a penetate?
One example of a penetrant is a substance used in non-destructive testing to detect surface-breaking defects in materials, such as cracks or fractures. Penetrants are typically applied to the surface of a material and then drawn into any defects through capillary action. This allows the defects to be visually identified after the excess penetrant is removed.
What type of visible surface defects exists on the casting?
mano la ak tau
What are the defects of wood seasoning?
Some common defects that can occur during wood seasoning include warping, checking (cracks on the surface), splitting, and blue stain (fungal discoloration). These defects can affect the quality and usability of the wood for certain applications. Proper drying techniques and conditions can help minimize these defects.
2 What type of visible surface defects exist on the casting?
mano la ak tau
What are some examples of surface defects in spectacle lenses?
* Cracks * Scratches * Peeling (if there is a coating on the lens)
What is defects in crystals?
Defects in crystals refer to imperfections in the orderly arrangement of atoms within a crystalline structure. These defects can take various forms, including point defects (such as vacancies and interstitials), line defects (like dislocations), and surface defects (such as grain boundaries). They significantly influence the material's physical properties, including strength, electrical conductivity, and optical characteristics, ultimately affecting its performance in various applications. Understanding and controlling these defects is crucial in materials science and engineering.
What are the defects of plastics?
Common defects of plastics include warping, cracking, shrinking, and surface blemishes. These defects can occur due to factors such as improper cooling during molding, poor material selection, or inadequate design. Proper processing techniques and quality control measures are essential to minimize these defects.
What are the defects in metal that has gone through a rolling mill?
Other than a failure to achieve a correct thickness, there are half a dozen different surface defects in rolled metal. These defects include lap (from overlap), mill-shearing, rolled-in scale, scabs, seams and slivers. Use the link below to discover more about these defects.
What is a penetrant?
A penetrant is a type of liquid or substance used in non-destructive testing to detect surface-breaking defects in materials, such as cracks or porosity. It works by seeping into these defects and then being drawn out to the surface, often enhanced by a developer, which makes the defects visible. Commonly used in various industries, penetrants can be fluorescent or visible dyes, allowing for effective inspection of components without causing damage.
What is meant by pinning?
pinning is the phenomena in which a domain wall is blocked or the magnetization is blocked/trapped due to surface defects.
