0
What else can I help you with?
What unit measures light intensity?
in foot-candles. i.e. the brightness of a candle one foot away
What is over weight for a 5 foot 11 year old?
the average weight would be 90 - 100 pounds.
What is the weight of granite?
The range of granite density is from 144 to 170 pounds per cubic foot (lbs./ft^3). In order to know the weight of your granite its exact density and volume must be determined. Dividing the known density by volume will tell you its weight.
How much does a cubic foot of mercury weighs?
The question cannot be answered because weight depends on the force of gravitatonal attraction which varies between locations. In outer space, for example, a cubic metre of mercury would weigh nothing. Even on the surface of the earth the force varies by up to 5%.
What does a cane do?
A cane's main function is to provide stability for those with balance issues, as well as the transfer of weight off an injured leg or foot.
What is the weight of a four foot long fluorescent light bulb?
A four-foot long fluorescent light bulb typically weighs around 2-3 pounds.
What is the weight of a 4 foot fluorescent light bulb?
A 4-foot fluorescent light bulb typically weighs between 1 to 2 pounds (approximately 0.45 to 0.91 kilograms). The exact weight can vary depending on the manufacturer and the specific design of the bulb. Generally, standard T8 or T12 fluorescent tubes fall within this range.
How much is a fluorescent light bulb?
A four foot tube is about $4.95.
What is the wattage of a standard four foot fluorescent bulb?
The wattage of a standard four-foot fluorescent bulb is typically around 32 watts.
What is easier to install an incandescent light bulb or a fluorescent light bulb?
It depends. If you have a compact fluorescent bulb, it is about the same difficulty level as installing an incandescent bulb. If however you are installing a 4 foot long fluorescent tube, it may be considered a bit more difficult because there are 2 pins on each end of the tube that have to line up on each end of the light fixture, thus it would require a bit more effort and coordination. Once you line the end pins up, you push the tube into the slot until it is fully seated, then you give it a quarter turn to lock it in place.
What is the lumen out put per 4 foot fluorescent T-12 light tube?
A typical 4-foot fluorescent T-12 light tube produces around 2,300 to 2,600 lumens of light output.
How much does it cost to run a four foot fluorescent bulb?
The cost to run a four-foot fluorescent bulb varies based on electricity rates and usage. On average, a standard four-foot fluorescent bulb uses about 32 watts. If you operate it for 12 hours a day at an electricity rate of $0.13 per kilowatt-hour, it would cost approximately $0.50 per month. However, costs can fluctuate depending on local electricity rates and specific usage patterns.
Where can I purchase 4 foot fluorescent light bulbs for my home or office?
You can purchase 4-foot fluorescent light bulbs for your home or office at hardware stores, home improvement stores, or online retailers like Amazon or Home Depot.
Give you the uses of foot candle?
A foot candle refers to the the amount of light a light bulb, sun.. etc puts out.
What does the electrical foot contact do in a light bulb?
The electrical foot contact in a light bulb serves as a connection point for the electrical current to flow into the bulb. It ensures that the electrical circuit is completed when the bulb is screwed into a socket, allowing the filament or LED components to illuminate. This contact is essential for the bulb's operation, enabling it to produce light when powered.
How much energy is used by a single 4 foot fluorescent light?
There are actually a wide variety of different kinds of 4 foot fluorescent lamps, which do not all use the same amount of energy. However, 40 watts is typical.
How do you change the light bulb in a 6 foot Budweiser Clydesdale lamp?
To change the light bulb in a 6-foot Budweiser Clydesdale lamp, first, ensure the lamp is unplugged for safety. Carefully remove the lampshade if it has one, and then locate the bulb socket. Unscrew the old bulb and replace it with a new one of the same wattage and type, then reattach the lampshade and plug the lamp back in to test it. Always handle the lamp with care due to its size and weight.
