The radius is 0.3438".
0.00625mm
The diameter and thickness of the penny could be expressed in millimeters = 'mm'. The area of the penny's faces, or even of its edge, could be expressed in square millimeters = 'mm2'. The volume of material in the penny could be expressed in cubic centimeters 'cc' or cubic millimeters 'mm3'. The mass and weight of the penny could both be expressed in grams = 'gm'. The age of the penny since it was minted could be expressed as a large number of seconds = 's'.
The unit you should use to measure the thin edge of a dime would be millimeters.
38 millimeters is 1.5 inches or 0.12ft
The commonest "small" unit is the millimetre - you may get a fractional value such as 0.94 mm (we don't have dimes here, so YMMV). The next smallest is the micrometre, but most folks outside the science community don't have much of an intuitive grasp of its size. The centimetre is also often used, as it's closer to the inch, but 0.094 cm is a bit of a mindwarp.
A U.S. dime is 17.91 millimeters in diamater, which is 0.00001791 kilometers.
The diameter of a dime is 1.79 centimeters. This is .705 of an inch and 17.9 millimeters. A dime is the smallest piece of change in American currency.
A nickel has a diameter of 21.21 millimeters, while a dime has a smaller diameter of 17.91 millimeters. This means the nickel is wider than the dime. Both coins are made of a combination of metals, with the nickel primarily composed of nickel and copper and the dime mainly made of copper and nickel.
The current USA 10 Cents coin is 17.91mm
The volume of a dime is approximately 0.36 cubic centimeters (cm³). This is based on its dimensions, which are about 1.35 millimeters thick and 17.91 millimeters in diameter. The volume can be calculated using the formula for the volume of a cylinder, considering the dime's shape.
A single dime has a diameter of approximately 17.91 millimeters. Therefore, 34 dimes would measure about 608.94 millimeters in total length when lined up in a row (34 dimes x 17.91 mm per dime).
The diameter of a penny is 19.05 mm, while the diameter of a dime is 17.91 mm. Therefore, the penny's diameter is approximately 1.14 mm greater than that of a dime.
17.9mm is the diameter of a dime..705 inches 17.91 mm
millimeters
The radius of a U.S. dime is approximately 10.5 mm. This makes the diameter of the dime about 21 mm, as the diameter is twice the radius.
A 20mm circle has a diameter of 20 millimeters, which is equivalent to 2 centimeters or approximately 0.79 inches. The radius of the circle is half of the diameter, so it measures 10mm. This size is comparable to a small coin, such as a dime. In terms of area, the circle has an approximate area of 314 square millimeters.
The volume of a U.S. dime is approximately 0.36 cubic centimeters (cm³). This small coin has a diameter of 1.8 centimeters and a thickness of 1.35 millimeters. Its composition mainly includes copper and nickel, contributing to its overall size and volume.