The lateral area of a right circular cone with a base diameter of 4 m and a slant height of 15 m is: 94.25 m2
Horizontal is flat, going from one side to the other, as in a horizontal line. ___ Lateral means to one side (or the other) or of one side. Lateral is a term often used in medicine and nursing. Example: The right lateral aspect of the woman's left leg was severely bruised.
A right circular cylinder apex
Given the four variables: baseA, baseB, hypotenuse, height, the formula is: (baseA+baseB+hypotenuse)*height+baseA*baseB
It's because of how magnetic force is. The magnetic force is always perpendicular to both the magnetic field and the velocity of the electron, or any charged particle. If you draw x's on a piece of paper, representing the direction of the magnetic field into the paper, then draw a short vertical line up, representing the electron velocity, the magnetic force will be horizotal to the right. This causes the velocity to change direction a little toward the right. But now the force must change direction a little, etc., etc, until you get a circular path. BTW, you only get a circular path if the initial velocity is in the plane of the paper, perpendicular to the field. If the electron comes in at an angle from outside the paper the path will be a "screw" shape, circular and forward at the same time.
Width refers to the measurement from left to right or vice versa. In extension, height refers to something measured from the ground up.
Lateral area is 188.5 m2
95.08 m2
For a right circular cone, the lateral area is 565.49 units2
The volume of a right circular cylinder with a diameter of 6.8 in and a height of 2 feet is: 871.6 cubic inches.
The lateral surface area of a right circular cone with a radius of 12cm and a slant height of 20cm is approximately 754cm2
This cone has a lateral surface area of approximately 226.73cm2
It is 10 cm.
A right circular cone whose slant height is 9 inches and whose base has a diameter of 2 inches will have a volume of 36.757 cubic inches.
The curved surface area is 314.16 square units.
11 units.
Curved surface area = pi*2*15 = 94 square meters (to nearest integer)
Volume of the cylinder: pi*radius*radius*height