0
What is the ratio for 2 quarts of water to 25 pounds of cement?
Wiki User
∙ 11y ago
64 ounces in 2 quarts, so 64/25=2.56 ounces of water per pound
David Marion
george marquez
Wiki User
∙ 11y ago25 lbs to 2 quarts of water, would be 0.16 oz of water per lb of cement.
Add your answer:
Earn +20 pts
How the moisture content of the aggregates obtainable at site affect the water content ratio specified?
Obviously, if the aggregates are in a surface wet condition, meaning the moisture content is greater than the absorption, that surface water increases the water-to-cement ratio and affects strength and durability.
How many pounds in 4 quarts?
You need 16 quarts.Hello! I'm here to give you a quick lesson..The question you asked is common since, no offence.4 Multiplied by 1 is 4.4 Multiplied by 2 is 8.4 Multiplied by 3 is 12.4 Multiplied by 4 is 16.-Charles
How much is 12 quarts in lb?
Use the search too -- it's located at the upper right of the screen -- to find your answer. You may have to do a bit of arithmentic, though, because you may find answers that provide the weight of one ounce of water or perhaps the weight of a gallon.
What would you use to measure the capacity of a water cooler?
water
How quarts does 25 pounds convert to?
A quart is a measure of volume and a pound is a measure of weight, normally one would not therefore be able to equate the two. However if one assumes that the quart volume comprises water, then one can equate that volume of water with the weight of the water (in pounds). A quart is 2 pints, which is 1.25 liters as the density of water = 1.0 then 1.25 liters will weigh 1.25 Kg, which is =2.7557782773125 pounds. Obviously a quart of anything with a different density would need recalculation.
What is the maximum water-to-cement ratio for dry shotcrete spray?
water cement ratoi teel me water cement ratio formula
How do you assess the correct Water Cement ratio in cement mortar at any ratio?
Slump test
What is water to cement ratio?
Water/cement ratio law states that the strength of concrete is only dependent upon water/cement ratio provided the mix is workable.Strength of concrete primarily depends upon the strength of cement paste.Similarly, the strength of the paste increases with cement content and decreases with air and water content.
Why does concrete mix with low water cement ratio resulted in hardened concrete having higher strength than those with high water cement ratio?
Why does concrete mix with low water cement ratio resulted in hardened concrete having higher strength than those with high water cement ratio?
What is the lowest water cement ratio?
0.4
What is water to cement?
Water cement ratio is defined as the indicator of strength is the ratio of water used compared to the amount of cement.Lower the W/C ratio, higher will be the strength.A minimum of W/C ratio 0.3 should be adopted.
How much water is required in 1 bags of cement?
it depends on the type of mix and water cement ratio.
What effect has the quantity of mixing water have upon the quality of concrete?
the strength of concrete is effected by water /cement ratio as the water/cement ratio increases the strength of the concrete decreases
What is specific gravity of cement grout with 100 percent ratio of water and cement?
1.51
What is the water ratio with sand and grout?
Cement send of ratio 1:5 for brick work
What is the ratio of cement water and sand in rcc?
what is ratio of rcc work machine foundation
How many pounds equal 5 quarts?
5 quarts of water is 10 pounds
