0
What else can I help you with?
What should be done whenever you are finished with a microscope?
remove the slide,return the low-power objective, use lens paper to clean the stage of microscope and the lenses
What is the correct microscope procedures?
Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens
How does the procedure for using the microscope differ under high power as opposed to low power?
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
When would a scientist use a electron microscope?
when they want to see the inside of the cell.when you use a electron microscope the cell is going to die.
Why are we not able to see viruses viruses with compound light microscopes we use is the science lab?
Becoz they r too smaller than bacteria and they examined in electron microscope(TEM&SEM)
Which lens on a microscope should you use first to look at a slide?
The lens that you should use to first look at a slide on a microscope is a low power lens then move on to a higher power for more clarity.
Why a microscope should be stored in low power objective lens?
Storing a microscope with the low power objective lens in place helps protect the lens and prevents accidental damage or contamination during storage. The low power lens is less delicate compared to other high-power lenses, making it a safer option for storage to ensure the microscope remains in good condition for future use.
What is the lens that is used to find the specimen on a microscope?
You use the low power lens to find the specimen with a microscope. Once you have found the specimen on low power, you can switch to high power for greater magnification. Just be sure to use only the fine adjustment knobs for focusing on high power so the high power objective won't hit the slide.
What should be done whenever you are finished with a microscope?
remove the slide,return the low-power objective, use lens paper to clean the stage of microscope and the lenses
What is low power objective in a microscope?
A low power objective in a microscope is a Small Lens with Low Magnifying Power. A microscope head with two eyepiece lenses, one for each eye. Generally this term is used in describing a high power (compound) microscope. With a low power microscope we say "stereo" head because, unlike the compound microscope, the stereo has a separate objective lens for each eyepiece lens, producing two independent paths of light, one for each eye. In the compound microscope with a binocular head, there are two eyepiece lenses but still only one objective lens and you will not get stereo vision. Hope this helps.
What does low power and high power mean on the microscope?
Low power on a microscope refers to lower magnification levels, allowing you to see a larger area of the specimen with less detail. High power, on the other hand, refers to higher magnification levels that provide a more detailed view of a smaller area of the specimen.
What objective do you use to see more detail on a microscope?
To see more detail on a microscope, you would typically start with a low-power objective (such as 4x or 10x) to locate the object, then switch to a high-power objective (such as 40x or 100x) for a closer, more detailed view. Adjusting the focus and lighting can also help in visualizing finer details. Remember to always handle microscope objectives carefully to avoid damage.
What kind of microscope do you use to see bacteria?
electric microscope
What is the different between light microscope and compound light microscope?
Answersimple first one is: their both different in quality. For example, a light microscope would use sunlight as its source of power,and therefore less effective. Compound microscope use electricity as its source of power for the same usage, which would be stronger and better to see the details in the specimen.
What do you use to see small objects?
microscope
Which knob on a microscope do you use to focus on low power?
You would use the coarse focus knob to focus on low power. Turn the coarse focus knob clockwise to bring the specimen into view and then fine-tune using the fine focus knob.
What is the correct microscope procedures?
Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens
