answersLogoWhite

0

Using a glass cutter (carbide blade) score the mirror along the back side and carefully snap the cut portion loose. This does require some practice and much care.

*Glass cutting can injure you and requires adult supervision.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is bevelling?

When something is beveled, it is cut or finished "at a slant" to a reference plane. Take a beveled mirror. The surface of the mirror is flat, but the edges are cut (ground off, actually) at an angle to the plane of the surface of the mirror. That part of the mirror that was ground down is the bevel.


How do you know if you need a hair cut?

Look in the mirror.


What is mirror roll?

Mirror roll, or mirror on a roll, is a rolled sheet of reflective material. It is usually self-adhesive on one side and can be cut and placed to create a mirror anywhere.


What can you make with a cracked mirror?

There isn't much you can make with a mirror that is cracked. Depends on the size of the mirror and the crack, but you could cut the mirror with a glass cutter and make a new mirror out of the old one. Cut the best part out and frame it as a new mirror.


How can I cut a mirror into different shapes?

To cut a mirror into different shapes, you can use a glass cutter to score the mirror along the desired shape. Then, carefully break the mirror along the scored line using pliers or a glass cutter. Be sure to wear safety goggles and gloves to protect yourself from sharp edges.


How do you remove a mirror from a 1977 280Z?

easiest way is to cut it off with a saws-all or hack saw- i did mine with a saws-all, just cut through the neck holding the mirror on, mirror falls free, and can easily grab the bolt that falls on the inside of the door-


How do you answer your traped in a metal room and you only have a mirror?

You look in the mirror see what you saw get the saw cut the mirror in half 2 halfs make a hole jump through the hole.


How do you make a model on the functioning of the eye?

To make a model on the functioning of the eye, a person can use a small hollow rubber ball and a mirror. Cut the ball in half and place the mirror at the back. Then cut out the pupil area and place something reflective in the bottom of the cut out.


What is a bevelled mirror?

A bevelled mirror is a mirror that has its edges cut and polished at an angle, typically 45 degrees, creating a framed effect. This design technique adds dimension and decorative appeal to the mirror, making it stand out in a room.


Is touching a mirror cause bad luck?

no only breaking a mirror is bad luck(7 years) you could cut your hand and get an infection as well. if you punched it with your fist or kicked the mirror with your foot.


How do you replace a glass mirror dodge?

I took a fillet knife and ran it behind the mirror to cut the glue. Advance Auto sold the right replacement. Apply glue strips and press mirror on.


How can you cut your hair?

With scissors, a mirror and some difficulty.