answersLogoWhite

0

12.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Geometry

How many 2x4 studs are in a 36 foot wall?

29 studs. 27 studs @ 16"o.c (doubled at each end)


How many 2x4's to build a wall 18' high and 90 feet long?

12' is max for a 2 x 4 wall. You will need 69 studs for a 90' wall with 16" centers.


How many 2x4 needed to frame 800 square feet?

The answer depends on the spacing of the 2x4s and the design of the structure (i.e. roof, the number of windows, & doors, etc). In general, though, if you figure there will be one 2x4 every 16 inches on center for the walls, you can roughly solve the problem as follows: 1. You can take the square root of your 800 SF to calculate the length of the walls. This would produce a structure that is approximately 28' 3" x 28'3" square (28.28 ft^2 = sqrt (800)). 2. Since you will have 4 walls and each wall will have at least 22 studs in it (22=28.28' * 12" / 16") then you will need at least 88 studs for the walls (88 studs =22 studs * 4 walls). 3. Assuming you make a simple slanted roof with no soffit overhang and 20" rafter spacing, you would need a minimum of 34 2x4s for rafters & a center support beam. (34 = (28.28' * 12" / 20" * rafters placed on both sides of a center support beam). 4. You will need 36 (2x4x10's) for wall sole & wall caps (36 = (28' 3" / 10 * 4 walls * 3 layers (1 sole + 2 cap layers)) Therefore, you would need a minimum of 158 (2x4s) (158=88+34+36). You would of course need more 2x4s for framing windows, doors, & any interior walls, closets, etc.


Can you install 2x2 ceiling tiles in a 2x4 grid system?

You have two options. You can purchase 24" cross pieces for your grid, to turn the 2X4 sections into 2X2 sections, or you can purchase 2X4 tiles that look like 2X2 tiles. Ceilume's Stratford Style is a good example.


How much insulation would you need to insulate a 16' x 20' cabin with 2 x 4 walls?

All outside facing wall should be insulated with fibergalss insulators. There are 2x4 size that comes in rolls, I've used one roll for single 10'x8' wall. I would get 5 roll for your needs. Remember to insulate your ceilng.

Related Questions

How many 2x4 studs are in a 36 foot wall?

29 studs. 27 studs @ 16"o.c (doubled at each end)


How many 2x4 studs for a 52ft wall?

how many 2x4 studs for a 52 ft wall 16 and 24 inches on center


How many 2x4 studs needed for a room that is 784 sf?

it would depend on actual the dimensions of the room rather then the square footage.Play it safe and order 1 2X4 for every 1 linear foot of wall.


How many studs in a wall that is 28' long 16 on center?

about 17 2x4 s If you have no windows or door openings and no partitions or corner framing you will need 13 studs and 3-16' 2x4's. How to figure this: Multiple the length of wall (16') by 12 (12" in a foot) and then divide by 16 (spacing 16") and add one for the end. 16x12=192 Divided by 16=12 + 1=13


How do you lay outstuds for a twelve foot wall?

depends on what size stud you are using and what material is going on the studs. for a non load bearing wall using 2x4 studs and to be covered with drywall a 16" on center layout is typical.


How many 2x4 studs for a 12ft wall?

In England typical stud spacing is 16", so 10 studs. Sometimes people use 2' spacing, which would require 7 studs


How many 2x4 do you need to build a wall 8ft long 8ft high?

9 if the studs are on 16" center and 7 if on 24"


How many 2x4's to build a wall 18' high and 90 feet long?

12' is max for a 2 x 4 wall. You will need 69 studs for a 90' wall with 16" centers.


What are the best ways to securely attach a shelf to a wall using 2x4 corner brackets?

To securely attach a shelf to a wall using 2x4 corner brackets, follow these steps: Locate the studs in the wall using a stud finder. Position the shelf and brackets against the wall at the desired height. Mark the locations of the studs on the wall where the brackets will be attached. Drill pilot holes into the studs at the marked locations. Attach the brackets to the wall using screws, making sure they are securely fastened to the studs. Place the shelf on top of the brackets and secure it in place with screws or nails. By following these steps, you can securely attach a shelf to a wall using 2x4 corner brackets.


How do you build walls?

Walls are commonly framed with 2x4 lumber, known as studs. The covering is fastened to the wall to enclose it.


How much does a pallet of 2x4 studs weigh?

A pallet of 2x4 studs typically weighs around 1,000 to 1,500 pounds, depending on the length and quantity of studs on the pallet.


What wood should I use to add a wall to my room?

You use hemlock 2x4 for studs and cover it with drywall. That's the simplest ,cheapest way to make an interior wall.