In Cabo Mexico I get $1.05 usd a sqft. It ranges from .85 to $110 usd Gert de Herrera Hogares Distintivos de Los Cabos S de RL de CV Distinctive Homes of Los Cabos real estate Sales, Marketing & Construction gertdeherrera@aol.com
(011-52)-624-160-4199 mx cell
303-495-5560 usa direct 661-452-2700 usa fax www.loscabosrealestategroup.com
No. You seal the top part of travertine AFTER it's installed.
It is easy to fold a strip of pastry into a triangular cone, put some samosa filling in it and "seal" it before cooking.
To install a window in a masonry wall, first, select the appropriate window size and type for your opening. Begin by marking the dimensions on the wall, then use a masonry saw or chisel to cut the opening, ensuring it's level and square. Next, install a waterproof flashing around the opening to prevent water intrusion, followed by placing the window into the opening, securing it with shims as needed. Finally, seal around the window with caulk or foam insulation and finish with trim as desired.
yes....2 or 3 seals stacked
Yes, it is generally recommended to seal tile after grouting, especially if the tile is porous, such as natural stone or unglazed ceramic. Sealing helps protect the grout and tile from moisture, stains, and dirt, ensuring a longer-lasting finish. It's best to wait for the grout to cure fully, usually about 48 to 72 hours, before applying the sealant. Always check the manufacturer's instructions for specific sealing recommendations.
what the cost of cleaning travertine floor and what do they charge for polish..
No. You seal the top part of travertine AFTER it's installed.
$1000000
The average price for sealing pavers varies by contractor. The average price as of 2014 is 1.50 and 2.50 per square foot.
you should wait 72 hours
A product called enrich and seal. my husband is a tile contractor and that is what he uses. We also used it in our own home. Once a year is sufficient.
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
How much does it cost to seal a concrete patio
Cost of a crank seal leak repair
The cost of chip seal can vary widely depending on factors such as location, the size of the area to be treated, and the specific materials used. On average, the price ranges from $1 to $3 per square foot, including materials and labor. Additional costs may arise from preparation work, such as crack sealing or patching. It's best to obtain quotes from local contractors for a more accurate estimate based on specific project needs.
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
The cost of a rear seal replacement on a 1998 Nissan Maxima will vary depending on the parts and labor cost. The price a rear seal starts at $27.00.