Some personal opinion here.
I like the look of a nicely finished edge, without metal. There are aluminum trim & transition strips that make a nice fabricated edge, you can see them at any flooring store.
As an old flooring installer in my younger days we were trained to turn & tack transitions and not use the tacky aluminum trim.
Just a personal preference. The turned under carpet takes a bit more craftsmanship, but there is nothing to keep the carpet edge from getting wet when the tile is cleaned.
There is also the option of using a wood transition which can look nice too, all a matter of taste.
The turn & tack I like is possible but much harder if the floor is a concrete slab, but if your installer knows about Z Bar you might have a good guy. it's an old timers trick.
I don't think folding is the right way to approach this transition. My carpet has a tack strip installed next to the tile and the carpet is cut so it lays right next to the tile edge. The tack strip holds it secure. There are also different joint transition trim pieces you can use if the height variation is to great. Check out Home Depot or Lowes.
home improvement centers have floor scrapers they will rent to you. they are a heavy machine with two wheels and a vibrating blade in front that you walk behind, great for pulling up tile, carpet, linoleum, etc. . .
Either way, there is a metal strip available that has a groove in one side for the tile and a lip that goes over the carpet. The most common brand name for these metal strips is Schluter.
yes you can, but that doesn't mean that it's the best solution. the best way is to remove the old tile. period.
With thinset.
The best way to install a transition strip between carpet and tile flooring is to measure and cut the strip to fit the doorway, secure it in place using adhesive or screws, and ensure it is level with both the carpet and tile surfaces for a smooth transition.
I don't think folding is the right way to approach this transition. My carpet has a tack strip installed next to the tile and the carpet is cut so it lays right next to the tile edge. The tack strip holds it secure. There are also different joint transition trim pieces you can use if the height variation is to great. Check out Home Depot or Lowes.
To install a carpet to hardwood transition strip, first measure and cut the strip to fit the doorway. Then, attach the strip to the floor using adhesive or screws. Finally, secure the carpet to the strip using a knee kicker or carpet stretcher for a smooth transition.
The best way to install a wood to tile transition strip in a room with different flooring types is to measure and cut the strip to fit the doorway, then secure it in place using adhesive or screws. This will create a smooth and seamless transition between the two types of flooring.
The best way to achieve a smooth and seamless tile to laminate transition in a room is to use a transition strip specifically designed for this purpose. This strip will cover the gap between the two flooring materials and create a clean and polished look. Make sure to measure and cut the strip accurately to ensure a perfect fit.
Carpet tile is becoming a trend that is all the rage in the purchase of new homes. There are many reasons that people are beginning to consider buying homes with carpet tile, rather than ordinary carpet. Carpet tile requires much less maintenance than regular carpet, which makes it overall less expensive than carpet. This article will discuss all of the reasons it is better to buy carpet tile than carpet. First off, one does not need to constantly vacuum carpet tile, as opposed to carpet. While one will still want to keep a vacuum cleaner on hand, one will not have to rack up high electric bills by constantly using a vacuum cleaner. In addition, one will save time by never having to clean carpet tile as much as carpet. There are even more ways that carpet tile actually saves a person money, rather than cost them extra money. One way that carpet tile saves money is because of the way it cools a home. Cool air is able to reflect from tile in a home and create an overall much more pleasant atmosphere. One does not need to pay hundreds of dollars in air conditioning fees when one has carpet tile in a home. In addition, carpet tile simply feels cool on one's feet. It is quite an economical decision to buy a home with carpet tile in hot states like Florida or California. In these sorts of states, it makes perfect sense to live in a home with carpet tile. Carpet tile helps to create a pleasant atmosphere in a home within warm states. In addition, one does not need to replace carpet tile, unlike carpet. Carpeting usually requires that a person replace it every few years. A person can end up spending hundreds of dollars to install new carpeting in a home. In addition, if something spills on carpet, it is usually very difficult to lift the stain from the carpet. In this sort of situation, a person will likely end up having to purchase new carpeting. On carpet tile, however, stains can be very easily lifted. Carpet tile is a much more economical way to go than carpet.
To create a seamless doorway tile transition between two different types of flooring, use a transition strip or threshold that matches the height and style of both floors. Ensure the transition strip is installed securely and level with both surfaces to create a smooth and visually appealing transition.
The best place to start in a room when laying carpet tiles is the corner. Pick a corner and start there and then work your way out. Usually you want to pick the corner furthest away from the door.
home improvement centers have floor scrapers they will rent to you. they are a heavy machine with two wheels and a vibrating blade in front that you walk behind, great for pulling up tile, carpet, linoleum, etc. . .
One effective way to measure and fill the gap between a carpet and baseboard for a seamless finish is to use a carpet trimmer or a utility knife to trim the excess carpet along the edge of the baseboard. This will ensure a clean and precise fit, creating a seamless transition between the carpet and baseboard.
Either way, there is a metal strip available that has a groove in one side for the tile and a lip that goes over the carpet. The most common brand name for these metal strips is Schluter.
the best way to lay carpet tiles is to keep the edges tightly fit.