Either way, there is a metal strip available that has a groove in one side for the tile and a lip that goes over the carpet.
The most common brand name for these metal strips is Schluter.
133.33 square yards of carpet
You can convert the built up area into the carpet area by simply covering the area in a carpet.
186.6 square yards of carpet are needed.
It depends on the carpet.
Carpet area in square units of measurments = length *width
It is generally not a recommended procedure. The abrasion of carpet on carpet will cause both layers to wear prematurely. Certain types of glue down carpet can be installed over existing glue down carpet. Check the manufactures installation instructions. I do agree that installing stretch in carpet over existing stretch in carpet is not a good idea.
form_title= Shaw Carpet from_header= Install carpet in your home. Do you need to remove existing carpet?*= () Yes () No Do you want to install stain resistant carpet?*= () Yes () No What color do you want the carpet?*= _ [50]
No. Carpet that is to be glued down must have a clean, smooth and sound surface prior to installation. It is necessary to remove the existing carpet before installing the new. Scrape away any old adhesives best as possible, vacuum, use a premimum adhesive or contact adhesive, and press the new carpet into the adhesive to get a good transfer.
It is possible to do but not a recommended practice Carpet tiles are designed to be installed over a stable surface. Even if you use one of the solvent based outdoor adhesives there will be some movement of one carpet against the other. This abrading will result in premature separation of the layers and you will be constantly trying to re adhere sections of the floor as they come loose. The best procedure is to remove the existing carpet, prep the surface & then install the tiles.
Repairing a carpet involves grafting a matching piece of carpet into the damaged area. The damaged area is removed and replaced. Be sure to line it up so that the fabric nap aligns with your existing carpet.
cut it
To lay carpet in a room effectively and efficiently, start by measuring the room and purchasing the right amount of carpet. Remove any existing flooring and clean the subfloor. Install carpet padding and stretch the carpet over it, using a knee kicker and carpet stretcher. Trim excess carpet and secure it along the edges. Vacuum the carpet to finish.
subfloor or gypcrete
Tension occurs in objects when something is pushing or pulling against something that is pulling the opposite way. Like a seagull gliding through the air or a book getting slid across carpet.
Have it re stretched by a fitter. That is presuming there is no other cause ie something underneath the carpet
Friction causes it.
Under carpet padding serves as a cushioning layer between the carpet and the floor, providing support and insulation. It enhances comfort by adding softness underfoot and helps absorb impact from foot traffic, reducing wear and tear on the carpet. Additionally, the padding helps to extend the lifespan of the carpet by preventing it from rubbing against the rough surface of the floor, reducing friction and potential damage.