answersLogoWhite

0

What else can I help you with?

Continue Learning about Geometry

How many square feet in a ton of sand?

100,000,000,000


Square meters in one ton of structural steel?

It is roughly 7.6m2 per ton of steel structure material. This can be used for approximate calculation.


How do you calculate hot mix asphalt by the ton to square feet covering an area 20x20 3 inches thick?

400 sq ft 54 sq ft per ton @ 3" 400/54=7.4 tons


How many square feet does a one ton air conditioning unit cool?

Most air-conditioners generate about 400 CFM per ton, but don't confuse Square Feet with Cubic Feet. A sunny South-facing room (SF) will take more CFM to cool than the same size room facing North. A very rough idea is: - For and older drafty, inefficient house 400SF per ton. Any sizing larger than this should be explained by the contractor. - For a newer reasonably built house 600SF per ton. - For an Energy Star Qualified house 600-800SF per ton. - Well designed, thoughtfully crafted houses can achieve 800-1200 SF per ton. Bigger is not better - getting the right size is important. About 70% of the work of the air conditioner is to remove the humidity from the air - this is called the latent load. An oversized unit will bring the temperature down quickly but not remove the humidity. A right-sized unit will run longer and do a better job with dehumidification allowing you to keep the set-point several degrees warmer and still achieve the comfort level expected.


How many gallons of gravel would you need to make a ton?

VERY roughly, one cubic yard of any dry aggregate is 1.25 tonnes. (Wet sand weighs VERY roughly 1.5 tonnes)

Related Questions

How many cubic feet in one ton of m sand?

Masonry sand is estimated to weigh approximately 160 pounds per cubic foot. Therefore, it would take 12.5 cubic feet of masonry sand to equal one ton.


What is the cost of sand by the ton?

Actually in the US is the cost of sand is about $11-13/Ton.


What is the price per ton for fracturing sand per graduations?

price per ton 40/70 fracturing sand


How much does rutile cost per ton?

how much does rutile cost per ton


If something costs 215.00 per ton how much does it cost per pound?

To convert the cost per ton to cost per pound, you need to know how many pounds are in a ton. Since there are 2000 pounds in a ton, to find the cost per pound you would divide the cost per ton by 2000. In this case, $215.00 per ton would be $0.1075 per pound.


How much does monazite sand cost per ton?

The Price of monazite sand varies based on its constituents, especially the percentage of Thorium and Cerium. For example, with a Thorium content of between 0.5% and 3%, Monazite sands can cost between $8 to $12 per gram from many African Countries.


How many meters of sand in one ton?

It will depend on type of sand ie fine,medium,coarse one cu mt per ton of sand will range between 1.4 ton to 2 ton


How much does asphalt cost per ton?

250 per ton


Average per ton cost of asphalt?

$ 130.00usd per ton


What is the cost of manganese ore per metric ton?

the cost per ton of manganese ore out of India? 80 yuan / ton degrees


How much does a ton of iron cost?

it cost 10.00 a ton.


How many ton sand per cubic meter?

About One