yes because it important to use it in mid point formula
Point Z
end point
Salt is very important to us. It is associated with sodium which is important for our body. It adds taste to our food. It keeps meat and fish from spoiling. I. Importance of Salt A. Adds taste to our food 1. (i dont know what to enter here) That is an example.
Definition: a tangent is a line that intersects a circle at exactly one point, the point of intersection is the point of contact or the point of tangency. a tangent is a line that intersects a circle at exactly one point, the point of intersection is the (point of contact) or the **point of tangency**.
1. Question is really vague, it is important to mark out the selected datum, as you just selected that datum? What else are you going to do with It? If you are working from another datum point just ensure that it is a good datum with critical measurements checked otherwise the new datum could throw out al measurements. P.s i wish the selected retards would stop answering with nonsense answers.
burnie
1. Question is really vague, it is important to mark out the selected datum, as you just selected that datum? What else are you going to do with It? If you are working from another datum point just ensure that it is a good datum with critical measurements checked otherwise the new datum could throw out al measurements. P.s i wish the selected retards would stop answering with nonsense answers.
Data is the plural, roughly meaning information. Datum is singular and is used someti es to mean a Landmark or starting point, a geodetic Datum point, like in the Grabd Canyon or the Promontory Point in Utah, both recognized landmarks.
burnie
Land-surface datum is a datum plane that is approximately at land surface at each well. If known, the elevation of the land-surface datum above sea level is given... Datum: any level surface, line, or point used as a reference in measuring elevations.
According to ASME Y14.5, a primary dimensioning datum requires at least 3 points of contact to establish the datum plane. Two points of contact are required for the secondary datum and 1 point of contact is required for the tertiary datum.
When utilizing the DAGR, the field that automatically displays the waypoint datum is the "Dat" field, which stands for datum. The datum represents the reference point used to define the location coordinates of the waypoint.
because the datum surface is perpendicular tothe direction of gravity at any point on it.but the horizontal surface is perpendicular to vertical at one point on it :D
A land survey datum (plural datums) is a reference from which measurements are made. The reference in the form of a set of coodinate and a direction. The datum can be arbitary (assumed) or absolute. The arbitary datum point is a point whose coordinate and direction are not known, so an arbitary value is adopted. All other coodinates of the survey project are connected together, but its datum point is not connected to a larger network. The absolute datum is a reference point whose coordinate and direction are already known within a frame of network. So the new survey become part of the network.
To select a suitable datum, consider a stable reference point on the workpiece or surface. Mark the datum clearly and securely. When marking out, ensure all measurements and reference points are taken from this datum to maintain accuracy and consistency. Working from a different datum can lead to incorrect measurements, misalignments, and errors in the final product. It is crucial to avoid this by consistently using the established datum.
hi =) hi =) It is the 0 point, usually the dead centre of the billet