Microsoft has developed software called ''Microsoft Virtual PC'' With XP Home or Pro Included.
Not Compatable with Intel
UART stands for Universal Asynchronous Receiver Transmitter.
UART (Universal asynchronous receiver / transmitter) is responsible for performing the main task in serial communications with computers. This device changes incoming parallel information to serial data which can be sent to communication line. UART is capable of encapsulating a byte that might be 5, 6, 7 or 8 bits wide in start and stop bits. Moreover it can attach an extra parity bit with the data for error detection. The width of stop bits may also vary. UART performs all the tasks, timing, parity checking, etc. needed for the communication.
Tape, DVD, CD, Floppy Disk
IPX/SPX : Routable // TCP/IP : Routable // NetBEUI : Not Routable
The purpose of the AT command 'ATMO' turns off the speaker
Port speed is how fast the computer talks to the modem. Modem speed is how fast the modem talks across the phone line to the other modem.
Answer: The MMX technology added new instructions designed for repetitive processing, more efficient ways to pass those instructions to the CPU and increased CPU cashed.
The Windows Scripting Host utility uses Windows commands to execute scripts that programmers have written using a scripting language such as VBScript or Jscript. To run the script, type wscript.exe filename in the Run dialog box.
Hayes Microcomputer Products (p.799 managing and maintaining your PC fifth edition)
The answer is &F.
And you can use the command AT&F (Which is preferred to ATZ when trying to solve a modem problem).
Serial and USB ports are most often used to connect an external modem to a PC.
In the past external modems connected to the COM (or serial) port.
However, most modern external hardware is USB these days, modems are no exception.
Token ring uses star topology . The data token is being passed from one computer to other allowing all the computer to have network access and avoids data collision.
performs special diagnostic tests
radio jack 11 is a connector for connecting telephone lines to modem
LAN uses RJ45
A game port is a socket on a game console or a computer for a joystick, flight controller, or paddle controls. Older game ports tended to have DB-9 or DB-15 connectors. However, newer consoles have their own style connectors.
On game consoles and older home computers, it was a socket that came with the device. On PCs in XT or AT cases, it was usually a part of a 3rd-party sound card, and the socket could also be used for MIDI with the right adapters. Some older PCs in ATX cases had built-in game ports.
The next step is to buy a Windows XP compatible modem card, and forget the Windows 98 modem card, unless your computer motherboard doesn't have an appropriate slot for the new modem card, but all PCI slots are equal for any modem card.
It is computer related hardware.
The two forms of modems are dial-up modems and private line modems
the data transfer speed
An RJ-11 connector is used to connect a 2- or 4-wire from an analog modem to a telephone jack.
Make sure the modem is plugged into the phone jack
* MAC addresses are used at layer 2 of the OSI model; IP addresses are layer-3 addresses.* MAC addresses are globally unique. IP addresses may not be unique, if private addresses are used.
* IP addresses have a sort of hierarchical structure (at the very least, network and host parts). MAC addresses are "flat" (no hierarchy).
* MAC addresses are 6 bytes long. IP addresses are either 4 or 16 bytes long.
* A MAC address is only relevant within its network. An IP network may be globally relevant.
Intel is the leading brand in CPU processors.