0
Rate this Study Guide:
☆☆☆☆☆Apply 12 volts directly to the horn an if it blows it is good. If not it is bad. Check the fuse for the horn. Check the horn relay. Check the horn button in the steering wheel. Check all wiring and the ground connection.
Electrons move onto the object, giving it a static charge.
Apex ;)
When a fuse blows, you should replace the fuse and check to see what might have caused it to blow. It's a sign that there might be something causing too much current to flow in the circuit.
It is in parallel, so one light can be on while others are turned off.
negative
A. It is measured in volts. B. It is related to current and resistance by Ohm's Law. D. It's what makes current flow in a circuit.
A it is an EMF it can exists in its form without performing any work
electromagnetic
In a series circuit the current is the same at every point. This is Kirchoff's current law.
No. Touching a live electric current is never a good idea.
A 120V power supply connected to a 30 Ohm resistor will produce 120/30 or 4 amps of current.
gasoline or diesel fuel...apex
a copper wire carrying current and another magnet.
Electric fields are invisible, and cannot be seen.
