Change it to another container
CAUTION: Some models are equipped with anti-theft-radio make sure you have the activation code before disconnecting battery * Disconnect negative battery cable * Detach the accelerator cable from the cable guides on the valve cover (It's not necessary to remove the cable guides unless you're replacing the valve cover) * Disconnect the PCV and breather hoses from the valve cover * Remove the spark plug wire cover bolts remove the cover and then remove the spark plug wires * Remove the bolts that attach the upper timing belt cover to the valve cover * Remove the valve cover bolts and then remove the valve cover
They cover there tree in empty bottles of Vodka. Merry Christmas!
Remove the valve cover
remove right valve cover on cadilac sts
How to remove drivers' side light cover
No
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
pull of plug wires and the 2 vacum hoses on the valve cover remove the accel cable and cruise cables and bracket also remove bracket by alt, remove 2 bolts in front of timing cover holding wiring on top of valve cover from alt, remove big nuts on top of valve cover there is 4 remove spark plug hole seals.remove cover....reverse to install
You are probably not going to remove the "stain" from the cover. It has been bleached of all pigment.
You need to remove the sliding door, then remove the screws from the bottom of the track, then remove the screw from the front of the track and slide the cover forward. There is a bar that pinches the metal from the cover and locks it in the channel. You need to slide the cover forward to unlock it then it just pops out.
you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points,
Dust cover on what?