I would say yes.
An open wound may sting a bit, but it is always a good idea to keep it clean.
Be gentle with the shampoo and dont rub the wounded area too much. Let the water flowing do the main work.
It may freshen you up a bit to have a shower after a minor head wound.
Be gentle when drying your hair afterwards. a hairdryer is a good idea. Your wound should not be allowed to be wet for an extencive period after a shower. That would make it an ideal growthplace for bacterias.
After you have dried your hair, you could/should put some antibacterial powder like bacemycine talkum over your wound. (this if it is an open wound, otherwise no need.)
If you have any dressings on a wound, you'd want to keep them dry. If you're dizzy, this is a bad idea. Otherwise, sure -- go for it.
The ball connector is what the shower head rotates on to point the shower head in different directions
To tighten a shower head properly, use an adjustable wrench to securely tighten the connection between the shower arm and the shower head. Turn the wrench clockwise until the shower head is firmly in place. Be careful not to overtighten to avoid damaging the shower head or the plumbing.
To change a shower head, first, unscrew the old shower head using a wrench. Then, clean the shower arm threads and wrap them with plumber's tape. Finally, screw on the new shower head and tighten it securely.
Some options for a shower head pipe extension to increase the height of your shower head include purchasing a longer shower arm, using a shower arm extension, or installing a ceiling-mounted shower arm.
The purpose of the shower head arm in a bathroom is to hold and position the shower head at a suitable height and angle for the person using the shower.
The first wound is on the head, when the soldiers placed a crown of thorns on his head.
Head Wound City - EP - was created in 2005.
The Shower Head was created on 1996-02-15.
Aerator in shower head is plugged up. Unscrew head, clean it out, and replace. Make sure you have teflon tape on hand for the treads on the shower arm when putting the head back on.
To replace a shower head, first, unscrew the old shower head by turning it counterclockwise. Clean the shower arm threads with a cloth. Apply plumber's tape to the threads of the shower arm. Then, screw on the new shower head by turning it clockwise until it is securely in place. Test the new shower head for leaks and adjust the position as needed.
gives you a shower