u dont
An aberrant glucose standard curve can be identified by inconsistencies such as non-linear relationships between glucose concentrations and measured absorbance, or if the curve fails to pass through the expected control points (e.g., known standards). Additionally, significant deviations from the expected slope or intercept can indicate issues with the assay. If the data points show high variability or outliers that do not conform to the expected trend, it may compromise the curve's validity for patient diagnostics. Regular calibration checks and running controls alongside patient samples can help detect these discrepancies.
To calculate the concentration of glucose in blood using the Beer-Lambert law principle and glucose oxidase, you would typically measure the absorbance of a glucose solution with a spectrophotometer at a specific wavelength. The formula to calculate the concentration of glucose is: Glucose concentration (mg/dL) = (Absorbance - intercept) / slope Where the slope and intercept are obtained from a calibration curve using known concentrations of glucose.
as long as you blanked with the media in your standard curve and blank with the NB for your unknown, then the curve should still be viable.
The normal distribution would be a standard normal distribution if it had a mean of 0 and standard deviation of 1.
Aberrant
It would not shift the curve; it would be represented by moving from a point inside the curve toward the curve.
To calculate the molecular weight of a protein in electrophoresis, you would use a standard curve generated with protein standards of known molecular weights run on the same gel. By plotting the migration distance of the standard proteins against their known molecular weights, you can then determine the molecular weight of your protein of interest based on its migration distance on the gel in comparison to the standard curve.
No. The curve in a normal distribution goes on out to plus and minus infinity. You might never see any observations out there, but if you were to make an infinite number of observations, you theoretically would.
A curve. It would be called a parabolic curve.
I would say either the curve 9320,8520 or one of the bolds
the tour has a better camera but the curve has better graphics i would go with the curve.
Demand curve will be perfect inelastic