0
What else can I help you with?
Will 14 Saturn Rim fit Chevy Aveo?
yes and no. the backs fit fine, but the fronts will rub on the caliper bracket slightly.
Where is the ac relay located on 1991 Honda Prelude?
it's bolted to a bracket in front of the motor, between the motor and the fans, slightly to the left.
How do you loosen the tension pulley on a 95 jeep Cherokee?
Loosen the 15mm nut that holds the pulley to the bracket then back off on the 13mm adjuster bolt.
What is correct bracket pipes or pipe bracket?
Pipe bracket.
How do you disassemble the inside rear view mirror mount to re-glue to the mount plate back onto the windshield?
Place a standard screwdriver in the slot on the bottom of the bracket. Pull out slightly and slide the windshield mount out of the bracket. The metal band acts as a "spring" that holds the bracket to the windshield mount. What a dumb design..CPEANS 2 in many auto mirrors, the windshield button is held to the mirror bracket with a small Allen screw. Look for this and undo it.
How do you replace a starter in a 1985 Olds 98?
To replace a starter in a 1985 Olds car, raise the front end of the car with a jack, Next, remove the two support bracket bolts at the transmission and pry the support bracket away slightly to obtain access to the starter bolts.
How do you reattach the gas pedal bracket in a 1996 Explorer XLT?
This happened to me on 12/29/07 while I was driving home. After I was towed, I found out it was welded on. The bracket had 2 holes but it was not screwed on, just welded. I took it to a shop and they drilled the holes that were on the bracket and put 2 screws in them. Now that the bracket was on all they needed to do was put the pedal back. I don't now if it is anything but he did say they ( Ford ) should NEVER have done it the first way. He thought it should be a recall, but I could not find anything about it. Hope all of this helps Carloss Hayward, California
Expand and simplify bracket a plus 5 bracket bracket a minus 5 bracket?
(a + 5) (a - 5) = a2 - 25
How do you straighten a 90 degree bracket?
To straighten a 90-degree bracket, first check if it is made of a material that can be easily bent, like thin metal or plastic. Use a clamp or a vice to secure the bracket, then gently apply pressure at the bent area with a hammer or mallet. If needed, heat the area slightly with a heat gun to make it more pliable. Always ensure to straighten it gradually to avoid cracking or breaking the material.
What are the compatible bottom bracket options for a UN55 bottom bracket?
The compatible bottom bracket options for a UN55 bottom bracket are square taper bottom brackets.
How do I properly install a bottom bracket on my bicycle?
To properly install a bottom bracket on your bicycle, follow these steps: Remove the old bottom bracket using the appropriate tools. Clean the bottom bracket shell on the frame. Apply grease to the threads of the new bottom bracket. Insert the new bottom bracket into the bottom bracket shell. Use a bottom bracket tool to tighten the bottom bracket securely. Check for smooth rotation of the bottom bracket. Reattach the crankset and chain. Test ride the bike to ensure proper installation.
What is the structure of a tournament bracket that includes a losers bracket?
A tournament bracket with a losers bracket is structured with two main branches: the winners bracket and the losers bracket. In the winners bracket, participants who win their matches advance to the next round, while those who lose move to the losers bracket. In the losers bracket, participants who lose in the winners bracket get a second chance to compete, with the ultimate goal of reaching the finals. This format allows for a double elimination system, ensuring that each participant has the opportunity to continue competing even after losing a match.
