Perspex can be softened and shaped using a strip heater. The strip heater heats the Perspex material to a malleable state, allowing it to be bent or formed into the desired shape.
Some of the dangers of using an indoor air heater are that in houses poor indoor air quality can result in a structural rot. Also, indoor air pollution may occur which is not very talked about.
It is an electric heater, with the heating elements in a straight line (a strip)
When using the Calor Gas heater, the heater must not be moved in any way. One must not put clothes and/or similar equipment directly on the heater while it is in use.
A strip heater is typically used to heat surfaces for applications like plastic bending or sealing. To use a strip heater, you would place the object to be heated on top of the strip heater and turn it on. The heat generated by the strip heater will soften the material, allowing it to be formed or sealed as needed.
Surprisingly, there are quite a few dangers using an oil filled heater. Oil and heat don't always mix so well because if it gets too hot, it could cause a fire. Also, if something happens where someone touches it, they will get severely burned.
There are many dangers associted witha broken heater such as a gas leak or the risk of freezing on cold winter nights.
Propane gas is highly flammable, and may cause fires or explosions if misused. A propane gas heater should not be used in enclosed spaces, and can cause hypoxia or death if the area is not properly ventilated. The flame of the propane gas heater may also ignite other flammables if they are nearby.
bending acrylic
Restaurant and bar supply retailers would be a possible place that you could purchase a hot strip heater. Web restaurant store has their own website which would be your best bet for purchasing a hot strip heater.
There are a number of dangers related to indoor portable heaters. These include the risk of fire if the heater is too close to flammable material, the risk to air quality if the heater/room does not have adequate ventilation and the risk of burns from the heater itself.
This is actually the best installation in warmer climates. It allows installation close to services using the most hot water, while mitigating for the dangers of a hot water heater; they catastrophically leak, explode, etc.