0
What else can I help you with?
How do you change front shocks on a Jeep Liberty?
Compress the shock spring with a spring compressor. Be very careful as the spring will be under several hundred pounds of pressure. Remove the shock bolts on both ends of the shock. Reverse the process to install the new shock.
Replace front shock on 1992 Nissan Serena van?
Compress the shock spring using a spring compressor. Remove the bolt on top of the shock plate. Remove the bolt on the bottom of the shock. Reverse the process to install the new front shock.
What is a combination of a shock and coil spring?
a coilover..
How do you remove the top nut on the rear shock of a 1997 Lincoln town car?
The rear shock spring will need to be compressed with a spring compressor. When the spring is compressed the top nut can easily be removed.
How do you change rear shock assembly's on a 1996 ford escort lx?
You have to take the whole strut assembly off (shock and spring). Then with a spring compressor on the coil spring, take the top nut off the strut shaft and take the spring off. Once the spring is off the whole strut assembly is replaced which will contain a new shock. Then you already have the spring compressed, so you put the old spring on to new strut (shock) put the top back on, release the spring and tighten the nut. You have to have a vise to clamp the strut into to replace the strut body.
What is the difference between a shock and a strut in a car?
A strut is a combination of a shock absorber and a coil spring
What is the function of shock absorber?
the function of shock absorber is to prevent the coil spring or the spring bar to move freely or to prevent them to bounce as it is.that is why they put shock absorber to have a good riding comfort depends on the road condition
What is automotive coil spring primarily and secondary function?
The coil spring provides suspension and absorbs shock.
Difference between spring and struts 2.0?
A spring is just a spring, a strut is a combination shock and spring unit which fits between the A frame and the vehicle body.
What do shock absorbers do?
mabye they "absorb shock!" 2nd Answer: In actual fact, shock absorbers do not absorb shock: the springs do that. The "shock absorbers" dampen rebound (Bouncing). In a bike, the spring is built right around the dampener part.
Can the shock part of the strut be replaced and not the spring?
Yes, the shock absorber portion of a strut can be replaced without changing the coil spring. This process involves disassembling the strut assembly to access the shock, allowing for the shock to be replaced independently. However, it's essential to ensure that the coil spring is in good condition and to follow proper safety precautions, as coil springs are under tension. If the spring shows signs of wear or damage, it might be wise to replace it at the same time.
What type of spring is used in the shock absorber system of an automobile?
Helical
