0
Your 1995 Honda Prelude may stutter at high RPMs due to several potential issues, such as a failing ignition coil, worn spark plugs, or fuel delivery problems like a clogged fuel filter or failing fuel pump. Additionally, a malfunctioning mass airflow sensor or issues with the engine management system could disrupt the air-fuel mixture, causing stuttering. It's advisable to diagnose the issue with a scan tool to identify any error codes and perform a thorough inspection of the ignition and fuel systems.
What else can I help you with?
What is a normal idle for a 1988 prelude?
my 1988 4ws Honda prelude idles low at 600 rpm
At what RPM's is the maximum horsepower on a 1989 Honda Prelude SI 2.0 Liter?
6200 rpm max
What are the RPM in a Honda Prelude?
Max rpm / redline (often they are actually different) is not based on the car but on the engine. Prelude S (F22A1 engine) max rpm: 6250-ish Prelude VTEC (H22A engine) Redline: 7200/7600 rpm Max rpm: 7400/8000 rpm Preludes from 92- were delivered with the following engine options F20A, F22A, H23A, H22A.
How do you hook up a RPM gage on a 1989 Honda prelude under the hood?
The tach should have 3 wires a 12v accessory, ground, and rpm wire. The rpm wire is the blue one on the distributor.
How do you slow idle on my 94 Honda prelude 2.3?
in park my 94 honda prelude 2.3 idles at 4000 rpm what can i do to slow down the idle ? <><><><> Idle speed is controlled by the computer, and is not adjustable. You have a problem with the computer or a sensor. Take it to a shop.
Why does your 1989 Honda prelude idle up to 3000 rpm then drop to 1000 rpm continuosly?
vacuum line is loose or disconnected. look for a small hose in the engine compartment that is like that
Why does your Honda Prelude only hit 3500 rpm?
If your Honda Prelude is only reaching 3500 RPM, it could be due to several issues. Common causes include a malfunctioning throttle position sensor, clogged fuel filter, or problems with the ignition system. Additionally, it could indicate a restriction in the exhaust system, such as a clogged catalytic converter. A thorough diagnostic check is recommended to pinpoint the exact cause.
Why does my Bronco II stutter at take off?
what RPM are you at when it stutters there could be all kinds of things going on, dose the stutter get better the higher the RPM or maybe when you go up hills or maybe when you shift need more INFO
Your 1992 Honda prelude has a problem with when driving the speedometer does not register the speed and the rpm goes up then goes back to working properly does anybody know what could be causing this?
Could be a loose ground wire
How do you ajust the idle speed on a Honda Prelude?
In my case i adjust my fuel pressure regulator. but that was because i added a walbro 255 Fuel pump. Generally tho there is a throttle body screw that you can adjust for your idle RPM.
How much horse power does your 1991 Honda prelude Si 2.1 have?
HorsepowerHeres the Honda engines hope you can find yours B20A (16-Valve, 4 Cylinder, DOHC, PGM-FI)Found in: Serial numbers 1000001~, 1500001~ and 1550001~ (Gold Valve Cover) 1985-1986 Honda Prelude Non-U.S. 1985-1986 Honda Accord Non-U.S. 1985-1986 Honda Vigor Non-U.S. Serial numbers 1600001~ and 1640001~ (Black Valve Cover) 1987-1989 Honda Accord Non-U.S. 1987-1989 Honda Vigor Non-U.S. Displacement: 1958 cc Compression: 9.4:1 Power: 160 hp @ 6300 rpm & 140 ft�lbf @ 5000 rpm Transmission: B2K5, F2K5B20A (16-Valve, 4 Cylinder, DOHC, PGM-FI)Found in: 1987-1990 Honda Prelude Japan Domestic Market This carries the same engine code as the original B20a above, but is actually a different engine. The serial number for these B20A will be: 5000001~B20A2 (16-Valve, DOHC, PGM-FI)Found in: 1986-1989 Honda Accord Non-U.S.B20A3 (12-valve, SOHC, dual side-draft carburetors)Found in: 1988-1991 Honda Prelude 2.0 S HorsePower: 104 @ 5800 (MT) 105 @ 5800 (AT) Torque: 111 @ 4000B20A4 (12-Valve, SOHC, dual side-draft carburetors)Found in: 1988-1991 Honda Prelude Non-U.S.B20A5 (16-valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude 2.0Si Power: 135 hp Engine cc: 1958.14 Cylinder cc: 489.535 Deck cc: 13.885 Head cc: 47.3 Compression Ratio: 9.0:1 engine using a pk-2 Honda ECU based on oki83c154 processor (Intel 8051 based with external ROM)B20A6 (16-Valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude Non-U.S. New Zealand, and Australian Domestic Market 140hp@6000rpm 170nm@5500rpm KY model is one of themB20A7 (16-Valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude Non-U.S. UK, France, Holland, Norway, South Africa Power 150 hp@6000 rpm Torque 180Nm@5500 rpm Compresion ratio 10.5:1B20A8 (16-Valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude Non-U.S. Russian, Swedish Domestic MarketB20A9 (16-Valve, DOHC, PGM-FI)Found in: 1990-1991 Honda Prelude Non-U.S. Finland, German, Norway, Netherlands, Russia, Argentina Power 140 hp@6000 rpm Torque 175Nm@4500 rpm Compresion ratio 10.5:1B21A (16-valve, DOHC, PGM-FI)Found in: 1990-1991 Honda Prelude Si States Very rare, it was only produced for the "Si States" models in Japan. There is an old myth that this engine produces 175+ HP, this is completely false.B21a:HP: 145 @ 5800 RPMTQ: 137 @ 5000B21A1 (16-valve, DOHC, PGM-FI)Found in: 1990-1991 Honda Prelude Si Power: 140 hp @5800 rpm Torque: 135 lb.ft @5000 rpm Engine cc: 2056.03 Cylinder cc: 514.0075 Deck cc: 10.191 Head cc: 51.0 Compression Ratio: 9.4:1 Torque (lb.ft. @ rpm): 135@5000
What is the proper RPM's at idle for a Honda ploit 2003?
It is 730 RPM +or - 50
