Let a gunsmith do it.
Independence movement in Portugal.
That marking just means "Special Steel". You need to find a model name or number to determine what it might be worth.
Built by Winchester and basically the same as the Model 190. Take out the magazine tube. Work the action several times to be sure it is unloaded. Check it, then double-check it. Drift out the crosspin at the rear of the receiver - it is plastic so be careful not to deform it - and you can remove the trigger group downward and to the rear. Pull the bolt back slightly so you can get a fingertip in front of it then remove it out of the bottom of the receiver. As you do this you will be able to remove the bolt handle to the side. This is all under spring tension so be careful of the recoil spring and guide. There is no need to take it down any further for routine maintenance. The bolt, for example, has a large spring inside with a ball bearing on each end which can be difficult to reassemble. sales@countrygunsmith.net
Need model information. You listed the barrel marks on a shotgun that are on many different models. Also need condition and details of the gun.
To make a model of a Greek amphitheatre, start by creating a base using sturdy materials like cardboard or foam board to represent the ground. Cut out concentric circles from additional cardboard to form the seating tiers, which can be stacked and glued together for stability. Add details like columns and a stage area at the front, and consider painting or decorating the model to reflect ancient Greek design. Finally, use miniature figures to depict spectators and performers, enhancing the realism of your model.
It depends on the model. Most are made in Japan. High end shotguns are still made in Belgium for custom orders. Some pistols are made in Belgium and assembled in Portugal.
Front? Rear? What model/year?
The browning model B-2000 was made from 1974-1983.These shotguns were made in belguim and assembled in portugal.
with a big hammer
How do you remove front door Panel on Hyundai Excel 1999 to Rplace front door SPEAKER'S
The year, make and model info would help.
No such model number.
Your browning model BAR which was made in 1985 should say either made in belguim on the barrel,or made in belguim assembled in portugal on the barrel.
To replace the front struts on a 2000 model Hyundai Sonata, you will first need to remove the tires. There will be 3 nuts on top of the strut mount. You will need to remove the 2 bolts that connect from the strut to the knuckle. Then you will need to remove the ABS sending unit as well as the front brake hose. Once these components are removed, you can remove the strut. In order to remove the strut, you will need a special tool to compress the spring. Once the struts are removed, you can safely replace them with new struts.
FN built them Belgium and assembled them in Portugal, They could handle steel shot and the A5 cannot, There was a R= recoil model and a G= gas model with a self regulating gas system. Date of manufacture was late eighties to the real early nineties.
Check out this website*** http://www.a1electric.com/grandam.htm *** It shows how to remove the panels on a 2002 model. It might be similar.
All cars are different . . . what year make and model