It was simply an adaptation of the already existing color TV.
It was simply an adaptation of the already existing color TV.
A computer monitor is hardware. It only provides for display.
Until the early 1980's most monitors were terminals. They were boxy video display terminals (VDT's) combined with an attached keyboard.In 1981, IBM introduced the first PC, also known as a "three-piece computer" because the monitor, keyboard and CPU were separate, rather than earlier computer terminals, which combined the monitor and keyboard.
It has to be, 800x600 or 1024x768
The first 'Tandy Color Computer' was referred to as the 'Radio Shack Color Computer'. It wasn't until near the end of the second version of the color computer (There were three in total) that the name was changed to the 'Tandy Color Computer 2'. The first version, as with the others, was developed by the Tandy Corporation (parent company of Radio Shack). The original color computer used the Motorola MC6809E microprocessor as the primary CPU, MC6847 VDG (Video Display Chip), The MC6883 SAM (Synchronous Address Multiplexer), and two Peripheral Interface Adapter chips (for Input/Output). That, plus RAM and ROM comprised the heart of the machine. The original machine came with 4k of RAM and 8k of ROM (color basic). Ultimately, Tandy released an extension to color basic (extended color basic), bringing the ROM to 16k, and RAM upgrades to 16, 32, and ultimately 64k. The original color computer had the standard 'Tandy Gray' color and a 'calulator style' 'chicklet' keyboard. The final revisions of the first color computer did convert to a white case. The next version of the color computer was functionally identical to the first in nearly every respect, and had an improved, but still flat keyboard, which was eventually changed to a full travel keyboard. The internal workings were improved, but retained the same basic chip layout for CPU, Video, SAM, and PIA. The last computer in the line was the Tandy color computer 3, which added 4 keyboard keys (control, alt, F1, and F2), and much of the internal workings were condensed to a single chip. The Video and Address chips were condensed to a single Chip (GIME)or 65424 Chip. This chip emulated all supported modes of the original machines, but left out some upsupported, (but non the less sometimes used) 'semi graphics' modes. It did however increase the resolution and color set over the older systems. By the end of life cycle of the color computer, it had a huge following which lives on today in a small, but active vintage community and emulators, but by the early 90's, it was clear that the majority of the market was going the PC compatilble route, and the color computer 3 was discontinued.
how is the first computer monitor
computer
Try turning the MONITOR off and then on again. If it doesn't work, change your computer color settings.
computer, the first were huge machings punching out numbers on a card
The First Colour computer was white
It was simply an adaptation of the already existing color TV.
To calibrate your computer monitor for accurate color representation in photo editing, you can use a hardware calibration device. This device will help adjust the monitor settings such as brightness, contrast, and color temperature to match industry standards. This ensures that the colors you see on your monitor are true to the original image.
To change the color settings and resolution on a computer with windows operating system , just right click on a plain area on the desktop and click on properties (the "Display Properties" dialog box will appear) then click on the Settings tab and change the slider Named Screen Resolution to ur required settings , u can set the color properties to 16 bit or 32 bit there , its recommended that u keep 32 bit color quality....
The first person to invent the monitor was Allen B. DuMont in the year 1920.
You can connect a CATV cable into a computer monitor by first attaching it to an external TV tuner. A VGA or HDMI output can then be attached to the monitor.
how do i remove the red screen from my monitor that my grandson put on my computer monitor and go back to the standard Blue screen
Go to the Main Menu Control. Click on Color. Apply your settings back to factory settings. Usually a computer virus does this or some person who does not know what to do.