A ship's speed is measured in 'knots', or nautical miles per hour. One nautical mile is the length of one minute of arc of a great circle, or 1/21600 of the length of the equator, which is 6,076 feet.
BHP on a ship is a U.S. thermal unit of measurement, and stands for "Boiler Horsepower". One BHP unit is equivalent to 33,475 BTU (British Thermal Units).
what is the instrument used by Christopher Columbus use to measure speed
Typically, it is the Marines. Marine Expeditionary Units (MEU) are aboard naval ships throughout the world always on standby should they be needed at a moments notice. There is no "first" in as many would have you believe. It depends on the mission and need. I would say Special Operation forces are probably the first in anywhere, be it Navy Seals or Green Berets. As for the whole MEU statement a ship cannot travel faster than a plane and Airborne units can deploy pretty much anywhere in the world faster than any ship bound forces.
The correct, straight forward answer would be no they do not. You would most likely have to call a freight carrier for information, since it would have to ship out of port.
The ship would have gotten stuck in the sand. The water wasn't deep enough for the large ship.
I would describe them as loyal and the transportation was a ship.
It depends on the speed of the ship.
No, Angstrom is a unit of length used to measure very small distances, such as the size of atoms and molecules. The speed of a ship is typically measured in units like kilometers per hour or nautical miles per hour.
design speed
To calculate ship speed from the RPM of a marine engine, you can use the formula: [ \text{Ship Speed (knots)} = \frac{\text{RPM} \times \text{Propeller Diameter (in feet)} \times \text{Propeller Pitch (in feet)}}{60 \times 6076} ] Here, the propeller diameter and pitch are crucial, and the constants convert the units appropriately. The formula highlights the relationship between engine speed and the resultant speed of the vessel through water.
the best ship to make is the type you want i would rather have shield rater than speed
The time it takes for a ship to sail 1000 km depends on its speed. For example, if a vessel travels at an average speed of 20 knots (about 37 km/h), it would take approximately 27 hours to cover that distance. Conversely, a slower ship moving at 10 knots (about 18.5 km/h) would take around 54 hours. Thus, the time varies significantly based on the ship's speed.
Your answer depends on where on the Antarctic continent you want to go -- it covers 10% of the earth's surface, and the speed of your ship.
There is no direct formula to convert tons to speed as they are two different units of measurement. Tons measure weight or mass, while speed measures how fast an object is moving. The conversion would depend on the specific context of the situation.
A ship's speed log measures the speed of the vessel through water by measuring the movement of the ship through the water. It typically consists of a rotor or impeller that rotates with the movement of the water, which is then recorded by a sensor to calculate the ship's speed. This information is crucial for navigational purposes and monitoring the ship's performance.
At what speed is your ship travelling?
Ship speed can be measured using a device called a pitot tube, which calculates the speed by measuring the difference in pressure between the ship's bow and stern. Another method is using Doppler log equipment, which measures the speed by bouncing sound waves off the seabed. GPS technology can also be used to determine the ship's speed accurately.