my friend 'el chupacabras' does.
left to right
== he always wears the belt buckle because it brings him good luck on tours and on set== ] that is why he wears it ==
The belt usually has a clip or ring that is on the left side (as it's worn) of the belt buckle. Before putting the belt on, put the length of the belt through that clip, then put the belt on. The small nub you'll find on the right side (as it's worn) of the belt buckle will go into a free hole to keep the belt buckle in place. If you have a detachable belt buckle such as a western belt, then the belt and the buckle are sold separately. If that is the case, then the belt will have a snap that will open the end. The buckle has a metal ring on the inside that the end of the belt will go through.
The parts of a belt buckle are the prong, buckle and belt.
With some belts there are clips in the reverse side, which you can use to change the buckle. What do you do if the belt you want doesn't have clips? Well I cut the stitiching or remove the rivets, depending on which the belt has, then replace the buckle and refasten it with safety pins, or if you have a thinner belt you may prefer to staple it. Hope this helps.
An Internet search gives plenty of suggestions for online shopping.
salman wears belts designed for ladies!!and he adds his buckle to it..!!it is of no specific brand..dats salman for u!
Traditionally, women's belt buckles are worn on the left side, opposite to men's belt buckles which are typically worn on the right. This convention stems from historical practices where men, who were predominantly right-handed, would draw their swords from the left side, leaving the right side clear for their belt buckle. However, in modern fashion, there is more flexibility and personal preference plays a larger role in determining which side a woman chooses to wear her belt buckle.
That's entirely opinion. You have to decide for yourself.
salman wears belts designed for ladies!!and he adds his buckle to it..!!it is of no specific brand..dats salman for u!
To replace the driver side pushbutton seat belt buckle on a 1997 Toyota Previa, first, remove the plastic cover around the seat belt assembly by unscrewing any screws or clips. Disconnect the seat belt buckle from its mounting point by unbolting it and unplugging the electrical connector if equipped. Install the new buckle by reversing the removal steps, securing it firmly and ensuring the belt operates correctly. Finally, replace the plastic cover and test the seat belt functionality.
The buckle.