Normally 3" BUT if your using a sewerage ejector you can go with a 2" grinder pump if properly vented
Usually toilet flange is glued down onto plastic drain pipe. There is a toilet flange that can be glued inside of plastic drain pipe also.
A large black pipe, 3-4 inches diameter. Start by looking directly under the toilet -you will see it. It's the biggest pipe under your house.
This can be a complicated job as the toilet drain ranges from 3" -4" and a variety of materials from Plastic to cast iron to galvanized. Then there is the venting to consider and NO a shower drain CANNOT be used for a toilet discharge as the shower drain is normally 2" diameter
It's not the toilet, there's a blockage in the pipes some where after the drain pipe from the toilet joins up with the drain pipe from the tub.You're going to need to have the pipe snaked.
depends on the size of drain piping. Most toilet either have a 3" or 4" drain. The size hole needed would be larger than the outside diameter of the piping. 3" pipe=4" hole / 4" pipe=5" hole
It depends on the configuration of the pipe. It must be a minimum of 3" pipe and the configuration of how it is hooked up must allow for the toilet to be vented and must not disrupt the venting of other fixtures. Call a plumber.
The purpose of an overflow pipe in a toilet is to prevent the toilet bowl from overflowing by providing a secondary pathway for excess water to drain out if the main drain gets blocked.
On a standard toilet in America the drain is 12 inches from the back wall to the center of the drain.
In the end, yes. ANS 2 - By "the toilet pipe" -I'm going to assume you mean the drain . -The toilet drain in a small house is generally the main drain. All other drains are connected to it.
The purpose of a toilet drain flange is to connect the toilet to the floor drain pipe. It provides a secure and stable base for the toilet to be installed on, ensuring a proper seal and preventing leaks. The flange also helps to align the toilet properly with the drain pipe, allowing for efficient and effective waste removal. Overall, the drain flange is essential for the proper installation and function of a toilet.
The purpose of the water pipe in a toilet system is to supply water to the toilet tank, which is necessary for flushing waste down the drain.
A standard sink drain pipe is typically 1 1/2 inches in diameter.