answersLogoWhite

0

The rear sprocket size on a 2008 Ducati 1098 is typically 39 teeth. This setup is part of the bike's gearing, which contributes to its performance characteristics. If modifications have been made, the size may vary, so it's always good to verify for specific bikes.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

When your in low gear what sprocket are you using?

It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.


What kind of sprocket do you want for a small bicycle chain?

well if you have a 8 tooth rear driver you will need a 23t sprocket, if u have a 9 tooth rear driver you will need a 25t sprocket, if u have a 10 tooth rear driver you will need a 28t sprocket, and if you have a 11 tooth rear driver you will need a 30t sprocket


What is the top speed of Honda 400ex with aftermarket rear sprocket?

depends if the sprocket is bigger or smaller than a stock sprocket.


How do you remove the rear sprocket on a polaris 90?

To remove the rear sprocket on a Polaris 90, first, ensure the ATV is secure and on a flat surface. Remove the rear wheel by loosening the lug nuts and taking off the wheel. Then, locate the sprocket bolts, typically found on the rear of the sprocket, and use the appropriate socket or wrench to unscrew and remove them. Finally, detach the sprocket from the hub, and replace or service as needed.


Can anybody give me the rear sprocket torque setting for an sv650 2008 please?

Rear: 60Nm Front: 145Nm Please see the related link below for more information.


What size sprocket is on the rear of a suzuki bandit 1200s?

The chain is size 530, and the stock gearing is 15/45, meaning that the front sprocket has 15 teeth and the rear sprocket has 45 teeth.


Rear sprocket size for a Yamaha yz250?

They came stock with a 49T or 48T rear sprocket you can choose a replacement with either a 48T, 49T, 50T, or 51T, if you have the old sprocket count the teeth on the sprocket and that tells if it is a 48T, 49T or whatever (48T = 48 teeth)


What is the purpose of the rear bike sprocket and how does it contribute to the overall performance of a bicycle?

The rear bike sprocket is a gear that helps transfer power from the pedals to the rear wheel. It allows the rider to adjust the resistance and speed of the bike by changing gears. The size of the sprocket affects the bike's speed and ability to climb hills. Overall, the rear sprocket plays a crucial role in the performance and efficiency of a bicycle.


What is the rear sprocket size of a 1981 200 Honda 3 wheeler?

It uses a 47 tooth sprocket.


Does a bigger sprocket give higher top speed?

A bigger front sprocket gives a higher top speed. A bigger rear sprocket gives a lower top speed. A bigger front sprocket is less torque more top speed, and a bigger rear sprocket is more torque less top speed.


How do you take a 250 kawasaki Mojave sprocket off?

first. take the left side rear wheel off. then remove the 4 bolts that hold the sprocket to the sprocket holder. then remove sprocket


What is the original set of sproket of shogun pro 125 suzuki?

engine sprocket =14t rear sprocket =35t