because the metal paper clip is conducted and it has energyand that how it lights up
The metal paper clip will conduct electricity, so completing the circuit.
because the metal paper clip is conducted and it has energyand that how it lights up
One way to connect two paper clips without directly touching them is by using a piece of metal wire or a magnet. Place the wire or magnet near both paper clips and they will be attracted to it, connecting them together without physical contact.
No, a magnet and a paper clip cannot light a bulb on their own. Light bulbs require an electrical current to produce light, which cannot be generated by simply using a magnet and a paper clip.
you if the force of magnets keep going until it can't connect.
Some light does which is why you can trace using it.
White light
Advantages of using aluminum foil are that it is impervious to moisture, gases, light, odors, and bacteria. Disadvantages of using this metal is that it is easily torn and broken.
The things you need for your curcuit are: A light bulb, Bell wire, A Battery and a conducter ex. pin, paper clip Attach the bulb together with the battery using the bell wire. With the two ends of the wire connect to the conducter and see if light bulb comes on.
To connect a wire switch to a light fixture, first turn off the power to the circuit. Then, connect the black wire from the switch to the black wire from the light fixture using a wire connector. Next, connect the white wires together and the ground wires together. Finally, secure all connections with electrical tape and mount the switch and light fixture as needed.
To connect PVC pipes to metal pipes using a PVC to metal adapter, the best way is to follow these steps: Clean and prepare the ends of both the PVC and metal pipes. Apply PVC primer and cement to the PVC pipe end and the inside of the adapter. Insert the PVC pipe into the adapter and hold in place for a few seconds. Repeat the process for the metal pipe end and the other side of the adapter. Allow the connection to dry and cure according to the manufacturer's instructions before using.
The Lloyd Loom process involves using kraft paper and metal wire. The paper is twisted around the wire and the result is woven into furniture or other decorative items.