0
tHEY ARE THE [ERSON WHO LOCKS OR TAGS OUT A MACHINE
What else can I help you with?
What is OSHA's lock out and tagout procedure?
Proper lockout tagout practices safeguard workers from the release of hazardous energy. Workers must be trained in the function of the energy control program and have the skills required for safe application usage and removal of the energy control devices.
What are the isolation and lock off procedures or permit to work procedures that apply to the equipment being maintained?
Isolation and lock-off procedures involve shutting down equipment, disconnecting energy sources (such as electrical, hydraulic, or pneumatic), and securing them to prevent accidental re-energization. A Permit to Work (PTW) system ensures that all hazards are assessed, and necessary safety measures are implemented before maintenance begins. This includes clearly labeling isolation points, using lockout/tagout devices, and obtaining authorization from a responsible supervisor. Documentation of the procedures and verification that the equipment is de-energized are critical steps to ensure worker safety during maintenance activities.
What is the definition of tagout?
the placement of both a lock and tag by an authorized worker on an energy isolating device in accordance with AFOSH 91-502 Chapter 21 to ensure that the energy-isolating device and the equipment being controlled cannot be operated until the lock is remove
What is the standard size of a factory?
There is no standard size of a factory.
When was Industry Standard created?
Industry Standard was created in 1982.
Which osha standard is titled the control of hazardous energy lockout tagout?
29 CFR 1910.147
What describes an authorized worker in the lockout tagout program?
ensure that their locks and tags remain in place during their part of the lockout/tagout procedure
With respect to lockout tagout Independent verification is?
an action performed by a second authorized worker that requires checking the position of an energy-isolating device for the application or removal of a lockout/tagout.
Who reviews and approves lockout or tagout programs at USF installations?
ground safety
Whose responsibility is it to conduct lockout tagout program assessments?
Ground Safety
What Disconnecting or making the equipment safe involves the removal of all energy sources and is known as?
Lockout-tagout.
What is the lockout tagout standard in osha and afosh designed to safeguard employees from?
hazards from the unexpected startup of machines or equipment or the unexpected release of hazardous energy while they are performing servicing or maintenance to machines and equipment.
What is an accepted method of isolating hazardous energy sources within a confined space?
Lockout/tagout procedures are commonly used to isolate hazardous energy sources within confined spaces. This involves physically securing energy isolation devices with locks and tags to prevent accidental re-energization of equipment. Additionally, proper training for workers on lockout/tagout procedures is essential to ensure safety during maintenance or repair work.
Who can remove a lock out tag out from a machine?
Only authorized personnel who have been trained in lockout/tagout procedures can remove a lockout/tagout from a machine. This typically includes maintenance workers or operators who have the authority and knowledge to ensure that the machine is safe to operate. The removal should only occur after confirming that all personnel are clear from the machine and that it is safe to restore power. Additionally, the person who applied the lockout/tagout should ideally be the one to remove it, unless they are unavailable, in which case specific procedures should be followed.
What chapter of afosh 91501 is titled hazardous energy control lockout tagout and mishap prevention signs and tags?
Chapter 21
What chapter of AFOSH 91-501 is titled hazardous energy control lockout tagout and mishap prevention signs and tags?
chapter 21
What is OSHA's lock out and tagout procedure?
Proper lockout tagout practices safeguard workers from the release of hazardous energy. Workers must be trained in the function of the energy control program and have the skills required for safe application usage and removal of the energy control devices.
