0
What else can I help you with?
Definition of pre-finished wood flooring?
Prefinished hardwood means that it is already finished (w/ stain and Poly) at the manufacturing plant. All you need to do is install it. This contrasts with unfinished hardwood where you install it and then sand, stain and finish it on site. Installing prefinished is faster since you don't have the extra steps of sanding, staining and waiting for the stain and poly to dry. This can easily add 4-5 days to your project timeline. And, finishing on site is messier. However, in my area of the country (NY/Northeast), most homeowners prefer the look of when it is finished on site (the floor is smooth vs. microbeveled edges) and it tends to cost a little bit less for unfinished hardwood. I'm going to attached a link to that better explains the difference.
What is the best way to apply stain and poly sand to achieve a smooth finish on wood furniture?
To achieve a smooth finish on wood furniture, the best way to apply stain and poly sand is to first sand the wood surface evenly and clean it thoroughly. Apply the stain in thin, even coats with a brush or cloth, following the wood grain. Allow the stain to dry completely before lightly sanding the surface again. Then, apply poly sand in thin coats, sanding between each layer for a smooth finish.
Can you put flat poly over satin poly?
Yes. Sand the satin poly with fine sandpaper to remove the gloss, then coat with the flat poly.
Can you tint poly with a little stain?
Minwax makes a product called Polyshades that has stain and polyurethane mixed together. It is not meant for floors. Adding stain to polyurethane will cause the chemicals to be deluded. It will not bond correctly and possibly not dry at all.
How can I replace my water poly tubing?
Hi, It is very much possible to replace the poly tube on your own. It would be like a small do-it-yourself project. And yes, you can get the plastic poly tube online from charterplastics.com and flyingwplastics.com
What are the benefits of using poly over gel stain for finishing wood projects?
Polyurethane offers several benefits over gel stain for finishing wood projects. Polyurethane provides a durable and protective finish that is resistant to scratches, water, and heat. It also enhances the natural beauty of the wood by adding depth and clarity to the grain. Additionally, polyurethane is easier to apply and dries faster than gel stain, making it a more efficient option for finishing wood projects.
Can you mix acrylic latex paint with clear urethane paint?
If you want to keep your paint color pure and cover your object and/or project with 1 or 2 coats, I wouldn't, it sounds like your trying to eliminate a step, I know they do it with stain and polyurethane but not with paint and poly. I think as long as its water-base poly & water-base paint (latex) its possible, try 1oz of paint, 1oz of poly and mix well and try it on a test piece to see if its to your liking. Good-Luck!
How can I effectively remove a stain over poly from my furniture?
To effectively remove a stain on polyurethane furniture, start by gently wiping the stain with a damp cloth. If the stain persists, mix a solution of mild soap and water and gently scrub the stained area. For tougher stains, use a mixture of vinegar and water or a commercial cleaner specifically designed for polyurethane surfaces. Be sure to test any cleaning solution on a small, inconspicuous area first to ensure it does not damage the finish.
Can you apply Poly Acrylic over a vinyl decal?
yes you can
Is kiln-dried pine suitable for outdoor fence in the new york area?
only if it is treated with an exterior stain/poly; by itsself it will gray in a year and not weather well.
How do you stain or dye a bamboo floor?
You can stain un-finished Bamboo like any other type of wood, (bamboo stains like hard maple, its difficult, but can be done) Bamboo will accepts normal stains, water based, oil based swedish stains, and even natural oil an waxes. staining bamboo is not difficult as one can wipe on a stain ( I used water-based stain for easy cleanup), and wipe it off and it is done. very little effort for beautiful results. the next time I stain bamboo I am going to use one of the color/poly combinations and let you know how that works.
How important is sanding between poly coats for achieving a smooth and professional finish on your project?
Sanding between poly coats is crucial for achieving a smooth and professional finish on your project. It helps to remove imperfections, create a level surface, and promote adhesion between layers of polyurethane. Skipping this step can result in a rough or uneven finish.
