To change a door handle, first remove the screws on the old handle using a screwdriver. Then, take off the old handle and replace it with the new one, making sure it is aligned properly. Finally, secure the new handle in place by tightening the screws.
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
To change a door handle on a 2004 Mitsubishi Endeavor, remove the 2 screws of the face plate. Then remove the 2 screws on the knob plate. Remove the door handle and replace with new.
How change door handle,drive side jetta 97
You have to take the door apart
take off door panel by removing screws, push in on middle of holders ,lift panel off of door release clips on door lock and door handle rod remove handle.
You will need to remove the inside door panel, by prying outward on the door panel retaining clips. When the door panel is removed the door handle assembly will be visible. Remove the door handle retaining bolts.
Remove inner door panel for access
There are 3 screw at the bottom of the panel then you can use a door panel remover which the local auto stores sell them to change the handle you will have to gut the door to locate the handle.
You remove it and replace it...
From the inside of the door. Its a pain.
You have to remove the door panel from the inside of the door,and then remove the door linkage from the inside of the door handle. Next there are two bolts that you need to remove from the inside of the door handle,and then it will come off of the car.
the cast iron piece is broken on the handle just had to change one