answersLogoWhite

0

To replace a 3-way switch with a different type of switch, you will need to identify the wiring configuration and choose a compatible switch. Turn off the power, remove the old switch, connect the wires to the new switch according to the instructions, and test the new switch to ensure it functions correctly.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

Where is fan control switch located?

Depending on what type of fan, the fan control switch can be located on the wall for a ceiling fan. Each type of fan will have a different location for the fan control switch.


How soon do you need to replace the radiator fan relay switch on a 2003 Jeep Grand Cherokee?

There is no time frame for replacing a relay. You will only need to replace one if it goes bad. Then you can test it by replacing it with a different relay from a different plug that is the same type, and that you check to see what that one will affect. hope this helps.


Where is the brake light switch on jaguar xk8 and how do you replace it?

the brake light switch is located on the arm of the brake pedal, above the pad. you will see a plunger-type switch that extends and retracts with the compression of the brake pedal. to replace it, unbolt it from the bracket attached to the brake pedal, disconnect the electrical connector, replace new part (compare the adjustment of the new switch with the old & adjust if necessary), connect electrical plug, mount new switch to bracket & test.


What type of switch would be used to switch on a kettle?

Its called a bi-metallic switch, which switches off when the kettle boils, as the switch is made from two layers of different metals, which expand at different rates when heated, which causes the sandwich of the two metals to "bend" when it heats up.


Can you replace a switch in Aurora paper shredder Model AS1712X maximum 17 sheets?

Yes, you can replace the switch in the Aurora paper shredder Model AS1712X. To do so, you'll need to disassemble the shredder carefully, ensuring you disconnect it from the power source. Check for the specific type of switch used in the model, and then you can replace it with a compatible switch. Always refer to the manufacturer's instructions or seek professional assistance if you're unsure about the process.


What key do you use to key over existing text?

Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.Press the Insert key to switch to overtype mode and then text that is there will be replaced as you type. You could also just select text you want to replace and just start typing, no matter what mode you are in.


How do you jerry-rig an ignition for a 91' craftsman ride on lawn mower?

go buy a universal ignition key for it or replace the ignition switch, or lastly, replace the switch with a simple toggle switch. there should be some type of repair shop in your town, right? or do it the old fashioned way, hotwire the darn thing :)


Can dexron 3 replace dexron type A?

Dexron 3 transmission cannot be used to replace Dexron Type A because they are not compatible. They are designed for use in different applications.


Replace 1964 Thunderbird headlight switch?

Pull out type? There is a silver button on the side of the switch (behind dash) Push button and pull switch all the way out Then remove bezel and remove switch from behind dash Ford suggests replacing plug also


How much does it cost to replace a dimmer switch?

The cost to replace a dimmer switch can vary depending on the type and quality of the dimmer switch you choose, as well as any additional labor or installation fees. On average, you can expect to pay between $20 to $50 for a basic dimmer switch, but this cost can increase if you opt for a more advanced or smart dimmer switch. Additional costs may also apply if you hire a professional electrician to install the dimmer switch.


How do you replace light switch in 1963 ford galaxie 500?

Pull out type: On the side of the switch (behind dash) is a silver button Depress this button and pull know all the way out of switch Then unscrew bezel and remove switch from rear Ford suggests replacing connector also


How do you change backup light switch on a BMW?

Backup light switches are different between automatic and manual transmission bmws. If you have the automatic the switch is under the shifter. Disconnect the battery and remove the shifter boot. Unplug the switch wires and replace the switch and reconnect the wires and battery. If you have a manual transmission the switch is on the passenger side of the transmission above the Allen type filler plug. Disconnect the battery, unplug the wires and unscrew the switch with a 19mm wrench. Screw in the new one an torque it down then reconnect the wires and the battery.