To troubleshoot a loose cable connection in your computer system, first power off the computer and unplug it. Then, check the cable connections to ensure they are securely plugged in. If a cable is loose, gently push it back into place. Test the connection by powering on the computer and checking if the issue is resolved. If the problem persists, try using a different cable or port to see if that resolves the issue.
cable modem
cable modem
To maintain the connection with your computer, the ethernet cable must remain connected to the system. If this is not an option, check to see if your computer has 802.11 Wi-Fi built in. If so, you can first connect the computer to the network via Wi-Fi by accessing your network connection settings.
You have to have a special cable which is "cross connection cable" or something like that.
If your computer says there are no Internet connections, simply restart it for it to discover the available Internet connections, or check the connection cable if you are accessing Internet over Ethernet.
Typically, one of three ways: An ethernet cable, which is the most common. Merely connect an ethernet cable to your computer and the router. A USB cable, less common. Same connection. A Wireless system (WiFi), becoming widespread. Requires WiFi antennas on both the router and the computer.
To troubleshoot connectivity issues between your camera and computer using a USB PTP connection, try the following steps: Ensure that the USB cable is securely connected to both the camera and the computer. Check if the camera is set to PTP (Picture Transfer Protocol) mode. Restart both the camera and the computer. Try using a different USB port on the computer. Update the camera's drivers and firmware. Check if the camera is recognized in the device manager on your computer. Test the USB cable with another device to see if it is working properly. Try using a different USB cable. If possible, test the camera on another computer to see if the issue is with the camera or the computer. Contact the camera manufacturer for further assistance if the issue persists.
restart the compuer or replug the cable or replug the USB cable
'Yellow' is descriptive but does not identify the cable. A description of the ends of the cable would be helpful. However, if your computer is connected to the network then the yellow cable is unnecessary. It may be a management cable or an alternative connection. If your computer is not connected to the network then it is likely that the yellow cable is the rj-45 connection and that you need to install a network card for your computer.
One good suggestion is to ensure that the monitor is properly connected and powered on. The user should check the power cable and the connection between the monitor and the computer, making sure they are secure. Additionally, they can try connecting the monitor to a different computer or using a different monitor with their system to determine if the issue lies with the monitor or the computer itself.
It depends on the internet system whether it is wireless system or wire system. If it is a wire system then you have to plug the internet cable into the computer.
rj11 cable is usually used for a phone line so for computers this particular cable can be used to connect to a dial up connection or dsl connection