The color codes for positive and negative speaker wires are typically red for positive and black for negative.
The positive speaker wire is a solid color, your negative wire should have a stripe on it.
For a 2001 Mitsubishi Adventure, the typical car stereo wiring color codes are as follows: the constant power wire is usually yellow, the ignition (switched power) wire is red, the ground wire is black, the left speaker wires are typically white (positive) and gray (negative), and the right speaker wires are usually green (positive) and purple (negative). Always verify with a wiring diagram or test with a multimeter, as variations may exist.
Red is usually positive and Black negative. Make sure you do not get this backwards. I recommend 0/1 or 0/2 AWG (Guage) Wire
There are for stereo wiring color codes. The red wire is the positive wire. The black wire is a ground wire. The green wire is the speaker wire. The white wire is the auxiliary wire.
In a Renault Clio, the speaker wire colors typically follow a standard convention where positive and negative wires are color-coded. Commonly, the positive wire is usually either red or brown, while the negative wire is often black or blue. However, it's important to verify with a wiring diagram specific to the model year, as color codes can vary. Always ensure to double-check connections to avoid any issues with audio performance.
It will be the wire without the black line on it. Usualy the black line on a solid color will mean negative (-)
Car Radio Battery Constant 12v+ Wire: Orange Car Radio Accessory Switched 12v+ Wire: Yellow Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: Brown Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue
Car Radio Constant 12v+ Wire: Orange Car Radio Switched 12v+ Wire: Yellow Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: Brown Car Stereo Antenna Trigger: Pink Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue
1999 Mitsubishi Mirage Car Stereo Wire DiagramCar Radio Battery Constant 12v+ Wire: Red/BlackCar Radio Accessory Switched 12v+ Wire: BlueCar Radio Ground Wire: ChassisCar Radio Illumination Wire: Green/WhiteCar Stereo Dimmer Wire: Black/YellowLeft Front Speaker Positive Wire (+): Red/WhiteLeft Front Speaker Negative Wire (-): Red/BlueRight Front Speaker Positive Wire (+): RedRight Front Speaker Negative Wire (-): BlueLeft Rear Speaker Positive Wire (+): Yellow/BrownLeft Rear Speaker Negative Wire (-): Yellow/RedRight Rear Speaker Positive Wire (+): Light GreenRight Rear Speaker Negative Wire (-): Yellow/Green
I lost the wiring colors codes but it's fairly easy. The key is to find out what the color codes are for the vehicle your connecting the radio to. After that, yellow and red wires on the 2500 are your positive and negative, and the remaining wires are Speaker wires - FRONT Left, FRONT Right, REAR Left, REAR right. Once your power wires are connected just connect speakers to each set of matching color wires and mark which speaker comes on.
I lost the wiring colors codes but it's fairly easy. The key is to find out what the color codes are for the vehicle your connecting the radio to. After that, yellow and red wires on the 2500 are your positive and negative, and the remaining wires are Speaker wires - FRONT Left, FRONT Right, REAR Left, REAR right. Once your power wires are connected just connect speakers to each set of matching color wires and mark which speaker comes on.
BLACK = Negative (-) Earth RED = 12V Power via Ingition YELLOW = 12V Power direct from battery BLUE = Antenna REM BLUE/WHITE = Amp REM WHITE = Front left speaker Positive (+) WHITE/BLACK = Front left speaker Negative (-) GREY = Front right speaker Positive (+) GREY/BLACK = Front right speaker Negative (-) GREEN = Back left speaker Positive (+) GREEN/BLACK = Back left speaker Negative (-) PURPLE = Back right speaker Positive (+) PURPLE/BLACK = Back right speaker Negative (-) Hope this helps Snowy